Up up and away

[jojackson4]

Classic Chim said:

Haha, what paint you using there. Looks great.

Mine are as old as i’ve had the car. I might replace them just before a final geo set up to be honest.
I never bothered painting track rod ends, gutted now ive seem those

1/2 a job

[Classic Chim]

jojackson4 said:

1/2 a job

My reasoning is Don’t fix wot ain’t broke.
If it breaks then I’ll fix it. If you noticed I fixed everything that’s a nightmare with Body on.
You can play on the 4 corners easily so I’ll go for new ones just so they are better than yours
What front drop links are you using.
I have Racetech proper ones ,,,,,,, and new rubbers

Edited by Classic Chim on Monday 7th February 19:09

[jojackson4]

Classic Chim said:

My reasoning is Don’t fix wot ain’t broke.
If it breaks then I’ll fix it. If you noticed I fixed everything that’s a nightmare with Body on.
You can play on the 4 corners easily so I’ll go for new ones just so they are better than yours
What front drop links are you using.
I have Racetech proper ones ,,,,,,, and new rubbers


Racing green new ones
Along with new ball joints

;)

Edited by Classic Chim on Monday 7th February 19:09

[Classic Chim]

You have more mods than Brighton.
New and you painted em. Setting new standards there bloke

[jojackson4]

Classic Chim said:

You have more mods than Brighton.
New and you painted em. Setting new standards there bloke

Too right lol
Hopefully get to the powder boys tomorrow to drop and pick up my rocker tops that will match my plenum I got from David

[jojackson4]

Bit of progress tonight
A mate got me the tube slugs so had a dabble and bush bash bosh 1 1/2 hours later looks good







And one for Al

[Zener]

Progress

[Classic Chim]

Nice Fab work.
Looking good.
Are you going for PC covering.

With those nice sleeves and joins you’ll hardly notice it’s had riggers replaced.
Top dollar

Edited by Classic Chim on Thursday 10th February 08:41

[jojackson4]

Bits back from the PC looks good
And some more stuff to do over the next week

[Classic Chim]

I just enjoy the fact I recognise all those brackets which a couple of years ago would have looked like a jigsaw to me. I’m weirdly looking forward to seeing those all coated up.

Nice job all round.
That’s a very bespoke colour on those there rockers. Very posh

[jojackson4]

Classic Chim said:

I just enjoy the fact I recognise all those brackets which a couple of years ago would have looked like a jigsaw to me. I’m weirdly looking forward to seeing those all coated up.

Nice job all round.
That’s a very bespoke colour on those there rockers. Very posh

Candy apple purple Big A
The brackets are off for a bath with some zinc and electricity

[Classic Chim]

jojackson4 said:

Oh mate why didn’t I think of that. Are you still painting/ covering them after? They will still corrode if not covered imho.?

[jojackson4]

One job finished

[jojackson4]

Bits

[jojackson4]

Zener said:

Red brake runner grease will help you assemble that lot, fit dust boot to lower part of piston whilst engaging the raised lip on boot into caliper body grooved recess then slowly ease piston into bore , don't force otherwise dust boot damage is certain if it jams pull out and start again observing that boot to groove seating is 360 degree sound , easier done that described sadly ,

Got the grease
All way grateful for the top tips

[jojackson4]

Delivery’s

[jojackson4]

I hate rear callipers

So did something easy

[jojackson4]

1 down what a pain in the backside

[jojackson4]

Both rear callipers done

And the finishing touches to the fronts thanks to Simon

[porterpainter]

I’m enjoying these pics, thanks for sharing