Raising the seat
Discussion
HI All,
I'm taking on Tiggsy's Chim. In case you didn't know, he's a bit of a tall lad, at least 6" taller than me. He's taken the seat out to remove the washers and hence lower the seat.
It's a little too low for me so I need to raise the seat. Anyone got any ideas what washers I should get? Plus a likely place to get hold of them? And where should the go? On the inside under the rails I assume.
Thanks,
Rob
I'm taking on Tiggsy's Chim. In case you didn't know, he's a bit of a tall lad, at least 6" taller than me. He's taken the seat out to remove the washers and hence lower the seat.
It's a little too low for me so I need to raise the seat. Anyone got any ideas what washers I should get? Plus a likely place to get hold of them? And where should the go? On the inside under the rails I assume.
Thanks,
Rob
cheers phil!
Rob has got a bargain.....its even going to get a last washdown (weather allowing) as i cant stand seeing it dirty!
Tiggs
ps- rob, once you undo the bolts under the seat (5min job) its easy to see where they go.....30-40 min total time (includes 5 mins of swearing when you bash your knuckles on something!)
Rob has got a bargain.....its even going to get a last washdown (weather allowing) as i cant stand seeing it dirty!
Tiggs
ps- rob, once you undo the bolts under the seat (5min job) its easy to see where they go.....30-40 min total time (includes 5 mins of swearing when you bash your knuckles on something!)
Gassing Station | Chimaera | Top of Page | What's New | My Stuff