Internal sill trim removal Skoda Yeti?
Discussion
I'm fitting a tow bar to my Yeti, and need to run the wiring from the front to back, the Witter instructions show how to remove all the trims except the ones across the door sills inside.
I can't find any screws so they must just be on clips, I've had a good pull at them but no luck and I'm worried that I may break them if pulling the wrong way.
Any one been there /done this?
I can't find any screws so they must just be on clips, I've had a good pull at them but no luck and I'm worried that I may break them if pulling the wrong way.
Any one been there /done this?
IF you can get to both ends-why bother ,if there's room for a "fishwire" to pull the cables through . Or is there enough room to push the cables up from the floor side?
Alternatively- ask on here
https://www.briskoda.net/forums/forum/170-skoda-ye...
there might even be a "how to " written by an owner, or one of the well qualified Techs might advise.
Alternatively- ask on here
https://www.briskoda.net/forums/forum/170-skoda-ye...
there might even be a "how to " written by an owner, or one of the well qualified Techs might advise.
Edited by Who me ? on Sunday 30th April 13:00
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff