Apple iMac network card problem

Apple iMac network card problem

Author
Discussion

MikeyT

Original Poster:

16,540 posts

271 months

Thursday 14th August 2003
quotequote all
The ethernet card has given up on our imac. I also have a G3 at home with an ethernet card in built in - can I just remove that one and put it in the imac?

Anyone know if it's a differnet size etc?

Any help appreciated ...

Mike

Sparks

1,217 posts

279 months

Thursday 14th August 2003
quotequote all
I thought that it was part of the motherboard?

I'll have a root around, and see what I can dig up.

Sparks

MikeyT

Original Poster:

16,540 posts

271 months

Thursday 14th August 2003
quotequote all
The computer works fine except for our ntl connection fo the internet which is via this Ethernet card.

Wired my old G3 up - not a problem. So the cable etc is OK.

If it's part of the motherboard then it's £££££ isn't it????

Sparks

1,217 posts

279 months

Thursday 14th August 2003
quotequote all
You can sometimes get whole new M/B from iMacs that have fried the crt (now that is expensive), not sure where to start though.

Are you sure, that some software hasn't been corrupted?

Check in the System profile to see if it thinks it is there. I assume you have checked the settings, as I have managed to accidently change a setting and broken the network.

You can get USB modems, but not sure how that would work. Also try at www.macassist.co.uk, the forum there is very good.

Sparks


Edited 'cause I pressed the wrong button :muppet:

>> Edited by Sparks on Thursday 14th August 15:50

MikeyT

Original Poster:

16,540 posts

271 months

Thursday 14th August 2003
quotequote all
Cheers Sparks ... will give it a go later

Edit: will link the imac up to the G3 thru the ethernet port to see if they're talking to each other via file sharing and see if the port in the imac is working ...

>> Edited by MikeyT on Thursday 14th August 16:24

Sparks

1,217 posts

279 months

Thursday 14th August 2003
quotequote all
MikeyT said:
Cheers Sparks ... will give it a go later

Edit: will link the imac up to the G3 thru the ethernet port to see if they're talking to each other via file sharing and see if the port in the imac is working ...

>> Edited by MikeyT on Thursday 14th August 16:24



If you have a hub, you should be able to see a 'connection' light on it, although if the card is disabled, it might not show. If you are doing direct mac-mac, bon't forget you need a cross-over cable.

Sparks, teaching his grandmother to suck eggs......

P.S If you haven't got it sorted by the weekend, I'll have a look at my iMac. Just drop me a mail to remind me.

Marshy

2,748 posts

284 months

Tuesday 19th August 2003
quotequote all
Do iMacs have any PCI slots in them? If so, and you've a spare slot, just buy a compatible PCI ethernet card and slam it in. Much cheaper than a motherboard repair I'd bet.

Sparks

1,217 posts

279 months

Tuesday 19th August 2003
quotequote all
Unfortunately not Marshy.

The early ones had a proprietary (sp?) slot, but newer ones just have usb & firewire, so in theory no need for pci slots.

I think MikeyT has it sorted now.

Sparks