alfa 156 plugs
Discussion
to remove the s.plugs on the ts 16v eng.
1400 1600 1800 2000
remove the oil filler cap then the top cover plastic or alloy.
undo the 3 special screws holding the long metal plate/bracket that holds the 4 coils and 4 plug leads...
lever the metal plate bracket upwards...
dont slip..dont curse..dont bust the coils or the
plug leads..try poping off the plug leads if they do
not move
if and when you have done that... air blast the plug holes... remove the plugs to clean or replace.
we charge £88 for the set.
put a bit of copperslip on the threads
do not over tighten or you will damage the plugs
so when you start the eng. the plug blows out
of its plug thread. regards eddythealfaman
1400 1600 1800 2000
remove the oil filler cap then the top cover plastic or alloy.
undo the 3 special screws holding the long metal plate/bracket that holds the 4 coils and 4 plug leads...
lever the metal plate bracket upwards...
dont slip..dont curse..dont bust the coils or the
plug leads..try poping off the plug leads if they do
not move
if and when you have done that... air blast the plug holes... remove the plugs to clean or replace.
we charge £88 for the set.
put a bit of copperslip on the threads
do not over tighten or you will damage the plugs
so when you start the eng. the plug blows out
of its plug thread. regards eddythealfaman
Gassing Station | Alfa Romeo, Fiat & Lancia | Top of Page | What's New | My Stuff