Battery for Tamora

[Adrian@]

It would be nice if my Yuasa YBX3069 fitted along the short edge...mine does not have the tags on, so I am chasing one that does OR another make ...mine is new and came with my recently purchased car, double check before you buy. A@

Edited by Adrian@ on Sunday 16th January 09:06

[non_linear]

It's worth considering using a battery with the positive terminal away from the chassis rail. I believe this type was fitted by the factory to later cars.
I've just fitted a YUASA YBX3096 to my T350. Cables were just long enough without alteration. My clamp is on the short side.

[Adrian@]

Thanks, I don't have a problem with using either IF they have the B9/B5 (depending on who's bumf you read the data from) type fitting tags on each end (so the battery is fixed properly) I am speaking to people ATM. I am happy to put this new (old one) battery on to the 280DH, as it has a strap type fitting.



My bar on the chassis holding the battery is 29mm.

Edited by Adrian@ on Saturday 9th April 15:23

[Adrian@]

Tayna supplied this today (I messaged Chris via their messaging sysytem, he checked and confirmed the battery had the fitting tags and it fits perfectly) I need to latch it down, remove the red plugs, bring the two drains from the heater (they are hard, so I might replace them) correctly and there is a shroud adhered to the edge of the old battery that will be swapped . A@

Edited by Adrian@ on Tuesday 18th January 18:45