Free-standing Stone resin bath too heavy?

Free-standing Stone resin bath too heavy?

Author
Discussion

TorqueDirty

Original Poster:

1,500 posts

220 months

Saturday 22nd August 2015
quotequote all
Hi folks,

In the process of refurbishing our main bathroom and need to chose a bath.

We have decided to go for a free-standing bath and of course the ones we like are both expensive and fooking heavy.

Top of the list is one that is 125kg since it is made from stone resin. I'm not so worried about the weight once installed, but I do worry about the actual process of getting the bath up the stairs and in to the bathroom. We have reasonably big wide stairs but they do turn 180 degrees half way up.

Here is what we are looking at:-

http://www.harrisblack.co.uk/nairn-stone-bath/?gcl...

Has anyone any experience of installing a heavy stone resin bath? If so what was your experience of getting it upstairs and in place?

There are some acrylic baths that we could live with if we had to but so far we prefer the stone one. Of course the acrylic ones are only 50kg max, so should make getting it up the stairs a relatively problem free activity.

Thanks for any advice / info.

TD

Gingerbread Man

9,171 posts

214 months

Saturday 22nd August 2015
quotequote all
My experience is dragging one up some stairs with just me and the delivery person as nobody else was on site. Luckily it was in a big house with a very wide stair case, so no tight turns to negotiate.

Other baths have gone up stairs with turns in them. You need to up end the bath when it gets too tight, and walk it around the turn before laying it back down and edging it up the stairs again. Typically it's tight, with a maximum of two people above pulling, two below pushing, but even then the stair's get tight width ways and it often falls down to one on the top pulling.

Also pay attention to how much the bath will weigh once full of water with people in it. Might want to reinforce the floor if it's not already.

silversurfer1

919 posts

137 months

Saturday 22nd August 2015
quotequote all


If you wanted a carved limestone bath then that is different but from the pictures that bath does not even look like stone and i think you can get something very similar and save a whole load of weight.

I used to have a couple of baths by victoria & albert they are nice quality and look just like the one you have pictured.

http://vandabaths.com/en/europe/collections/style/...

ss

Simpo Two

85,538 posts

266 months

Saturday 22nd August 2015
quotequote all
silversurfer1 said:
If you wanted a carved limestone bath then that is different but from the pictures that bath does not even look like stone
'The solid natural stone bath is formed using the raw materials - resin and natural limestone.'

So it's the stone version of chipboard smile

silversurfer1

919 posts

137 months

Saturday 22nd August 2015
quotequote all
Simpo Two said:
'The solid natural stone bath is formed using the raw materials - resin and natural limestone.'

So it's the stone version of chipboard smile
Pretty much bang on ! laugh

Neil - YVM

1,310 posts

200 months

Saturday 22nd August 2015
quotequote all
We fitted a V&A Elwick bath a year or so a go, getting it up the beautifull, freshly decorated ornate staircase was a bit nerve wracking , but as Gingerbread said, stand it on its end and lift carefully with two of you, and it is do-able.

Lovely finished bath, expensive, but very nice.

daytona365

1,773 posts

165 months

Saturday 22nd August 2015
quotequote all
Why not get one carved from the solid, they do exist ?

Grandad Gaz

5,094 posts

247 months

Sunday 23rd August 2015
quotequote all
Don't know what you lot are whinging about wink

There used to be only one type of bath and that was cast iron.

dirkgently

2,160 posts

232 months

Sunday 23rd August 2015
quotequote all
Grandad Gaz said:
Don't know what you lot are whinging about wink

There used to be only one type of bath and that was cast iron.
That`s posh that is, ours was tin.

V8RX7

26,902 posts

264 months

Sunday 23rd August 2015
quotequote all
125kg /2 = 62.5kg - easy for two reasonably strong blokes.

A tiny delivery driver offloaded my 900 x 1700 shower tray that was 60kg, by himself.

Neil - YVM

1,310 posts

200 months

Sunday 23rd August 2015
quotequote all
V8RX7 said:
125kg /2 = 62.5kg - easy for two reasonably strong blokes.

A tiny delivery driver offloaded my 900 x 1700 shower tray that was 60kg, by himself.
When lifting up stairs, the guy at the bottom will take most of the weight, not 50/50.

FlipFlopGriff

7,144 posts

248 months

Sunday 23rd August 2015
quotequote all
Similar problem for us when we did ours. Wanted cast iron but just too heavy/bulky to get up the stair. Ended up with a copper bath which looks fab.
FFG

V8RX7

26,902 posts

264 months

Sunday 23rd August 2015
quotequote all
Neil - YVM said:
V8RX7 said:
125kg /2 = 62.5kg - easy for two reasonably strong blokes.

A tiny delivery driver offloaded my 900 x 1700 shower tray that was 60kg, by himself.
When lifting up stairs, the guy at the bottom will take most of the weight, not 50/50.
So you get the bigger (thicker) bloke at the bottom.

Cement bags used to be 50kg - a big builder can move 100kg relatively easily.