Indoor Bike Cover Recommendation
Indoor Bike Cover Recommendation
Author
Discussion

abw280

Original Poster:

205 posts

297 months

Sunday 8th October 2017
quotequote all
I keep one of my bikes running through the winter (my 17 year old Ducati, not the most sensible winter hack) and will be winterising the other 2 at the end of the month. I always have a real problem with condensation forming on the bikes, any recommendations for an indoor cover that helps prevent moisture build up? The garage is concrete and not insulated, hence the problem, insulating the garage not a viable solution for me though.

jjones

4,492 posts

224 months

Sunday 8th October 2017
quotequote all
Moisture build up inside is down to ventilation issues. Maybe sorting this will then mean you just need dust covers for the bikes.

Max5476

1,022 posts

145 months

Sunday 8th October 2017
quotequote all
I wouldn't put a bike cover on my bike if I was worried about condensation. This will act to trap the condensation on the bike potentially leading to worse corrosion than without as there won't be any ventilation.

If insulating the garage isn't an option, I would consider adding vents to keep the air moving inside it instead.

Rubin215

4,201 posts

187 months

Sunday 8th October 2017
quotequote all
Dehumidifier if you have power in the garage, sacs of desiccant if you don't.

Ask at your local dealer if they have any bikes getting delivered; a lot of manufacturers pop a couple of sacs of silica gel in the crate with the bike and the dealer will normally just bin them.
A few placed in tubs on the garage floor will help keep it dry inside.

podman

9,086 posts

271 months

Monday 9th October 2017
quotequote all
As said, you need to sort the ventilation issues above anything else, unfortunately I have to park my KR1 around 45mins away in a friends shed, last year I didnt get chance to go other my normal clean, polish and lube(!) routine before tucking it away and his shed is porrly vented.

As a result, the the sheet id covered it in, got damp and stayed damp, resulting in the finish becoming tarnished on many of the bolts, fasteners and my (nearly) new end cans...I dont have a problem like this in my garage but this year, the KR will be in a vac bag at my friends.




Prof Prolapse

16,163 posts

221 months

Monday 9th October 2017
quotequote all
I used a very cheap oxford cover on the GSXR. It really is just a dust cover of that almost paper material. It's only purpose is to avoid spray paint, and wood shavings getting on the bike and stuck to the ACF-50, otherwise, as above, I wouldn't bother.

I just put away properly then don't worry about it until spring. I don't worry about humidity for a bike I use.










BobSaunders

3,110 posts

186 months

Monday 9th October 2017
quotequote all
Oxford micro-fibre cover thing for me.

However, my garage is part of a insulated townhouse (apart from single skin garage door). So temperature does not drop much below 10-12 degrees.

You could consider this - https://www.carcoon.com/carcoon-bikebubble

https://www.pistonheads.com/gassing/topic.asp?t=13...


moanthebairns

19,181 posts

229 months

Monday 9th October 2017
quotequote all
What exactly is a cover going to protect? Different when the bikes outside, uv rays, bird st, hunners of rain etc.

But generally outdoor covers are well ventilated due to big bding winds trying to unseat the fking things.

Inside your garage, a cover is a waste of time unless its as dry as a witches tit.

Whats going to suddenly fall on it ruining it? It'll get dusty......

That said if you have power a de-humidifier will be smashing, very cheap and actually heats a room if left on.

abw280

Original Poster:

205 posts

297 months

Monday 9th October 2017
quotequote all
Thanks for the replies. Forgot to mention that I don't have power, otherwise the carcoon/dehumidifier would be my choice. Seems to be much worse the last 2-3 years, mild/damp winters don't help, looks like I'll be going down the copious amounts of Acf50 route again.......