Griff Scratches

Author
Discussion

gibber1

Original Poster:

26 posts

277 months

Friday 5th September 2003
quotequote all
People,

Any 'competitively priced' ideas to remedy the surface scratches on my beloved griff from a 'cheap' car cover??

It's outside and I guess the cover trapped some dust etc and there are visible 'grain tracks' on the car. It's deep blue but the marks are still apparent and definitely only surface.

I've never used T-cut beofre and I have no idea whether that's an option here..

any ideas would be gratefully received

cheers

N17 TVR

2,937 posts

273 months

Friday 5th September 2003
quotequote all
I've used (successfully) Autoglyms, Paint Restorer, Super resin Polish & to finish their Deep Gloss Shine.

Paint Restorer is abrasive and should be used with care, Super resin polish less abrasive, but will remove light scratches, the deep gloss shine hides the little swirl marks.

Other people will have other products, you pays your money & takes your choice.

V8 Archie

4,703 posts

250 months

Friday 5th September 2003
quotequote all
Try this.

I believe T-cut works but, if I remember rightly, some people consider it too abrasive.

spivvy

1,534 posts

256 months

Friday 5th September 2003
quotequote all
try Mcguiars Scratch X
Speel
ScratchX is the most effective way to remove fine scratches and swirls from automotive paint by hand. This product is guaranteed to deliver the finest results possible by hand (some scratches require removal by machine applied professional formulas). ScratchX removes surface contaminants, oxidisation and blemishes as well as enhancing colour. Unlike many paint correction formulae on the market, ScratchX will not leave more scratches than it takes out. It's ideal for use as a quick touch up or to revive a car's entire finish.


www.meguiars.co.uk/
may do the trick


>> Edited by spivvy on Friday 5th September 20:25

pies

13,116 posts

258 months

Friday 5th September 2003
quotequote all
Try scratch X or GS27 (same stuff different name) patience will also be needed

gadgit

971 posts

269 months

Friday 5th September 2003
quotequote all
This is the stuff the pro's use.

Quote,

the softer composition, Generally a finer rubbing compound is used and finishing
off with an even finer polishing compound. For example Farécla G3 followed by ...
Quote,

Representing the latest in compound technology, NEW Advanced G3 is ... Apply a small quantity
of Advanced G3 to the ... in clean water, and fit to a polishing machine.

So there you have it FARECLA G3

Don't use anything else!

gadgit.

Morgala

327 posts

250 months

Sunday 7th September 2003
quotequote all
Where can you get FARECLA G3 (without having to buy online)?

r4 dhc

18 posts

253 months

Monday 8th September 2003
quotequote all
I've tried numerous polishes and mine, and found that Turtle Wax Colour Magic is one the best. You want to make sure you get the T-cut version of it, and then the colour that matches as close as possible.

The benefit is if the scratches dont actully come out then they at least blend in with the rest of the paintwork.

Following a good couple of coats of this I also recommend the Auto Glym Hard resin Polish. Brings the whole car up a treat!

plotloss

67,280 posts

272 months

Monday 8th September 2003
quotequote all
Morgala said:
Where can you get FARECLA G3 (without having to buy online)?


Handily enough theres a place in Slough.

JC Bodyshop Supplies I believe its called these days.

Try a pot of G3 and a pot of 3M machine polish...

gibber1

Original Poster:

26 posts

277 months

Wednesday 10th September 2003
quotequote all
Thanks so much for the info - I'm going to have a look at the products this weekend. I'll keep you posted.

Let's hope the weather lasts for a few more blats down some country roads eh??!!

Cheers

The Gibber