Lights problem

Author
Discussion

chris_speed

Original Poster:

308 posts

263 months

Friday 6th July 2012
quotequote all
Hi chaps, looking for a bit of help.

Main beam and full beam aren't working - I've tried the usual, as this did happen before. I cleaned the contacts on the switch on the dash, and they then worked ok, for two weeks smile They've failed again now, and I've replaced the switch this time (thanks for your prompt delivery Redline) but to no avail. Checked all fuses and reseated relays.

Any direction I should be going in next?

Many thanks for any help

Chris.

chris_speed

Original Poster:

308 posts

263 months

Friday 6th July 2012
quotequote all
Nope, flasher doesn't work. Thanks for your reply.

chris_speed

Original Poster:

308 posts

263 months

Saturday 7th July 2012
quotequote all
Any way I can find out which is the right relay, or test the relay?

chris_speed

Original Poster:

308 posts

263 months

Saturday 7th July 2012
quotequote all
I've tried replacing the dip switch and the main off/sidelight/main beam switch, both to no avail... I admit I haven't checked the bulbs, will do so this aft. Thanks for your reply.

chris_speed

Original Poster:

308 posts

263 months

Saturday 7th July 2012
quotequote all
Well, it's not the bulbs... Is the flasher unit the one that clicks with the indicators? In terms of looking for one in Halfrauds, is there a way of identifying it? There is a diagram on the side of it..

chris_speed

Original Poster:

308 posts

263 months

Saturday 7th July 2012
quotequote all
Now bought a relay (the one that works the indicators) and replaced it - still no difference.

chris_speed

Original Poster:

308 posts

263 months

Saturday 7th July 2012
quotequote all
Went back to it after some dinner from my ever patient missus, and finally cracked it. Was a faulty relay, as my buying one from maplins enabled me to swop some over and create the fault others had described on blatchat; the full beam working along with sidelights, just not main beam. Then just a matter of swopping connectors round on the dipswitch to get things as they should be. (I'd been messing with them all day in a vain attempt to make them work!)

Thanks for all your replies smile

Edited by chris_speed on Saturday 7th July 21:02