X flow starting problems
Discussion
Got a 1700 super sprint which refuses to start!
Running fine about 4 weeks ago following a service, but been left in the cold since then.
Have spark and fuel pump running fine also.
New plugs and Leads at service as well
Can hear it wanting to start with a few little coughs but no joy!!
RAC been out but he was stumped as well!
He was mucking about with the distributed caps and now worried plugs in wrong way...
Should it be cylinder 1 in top right hand plug, 2 in top left, 3 in bottom right and 4 bottom left??
If you see what I mean?
Any ideas?
Running fine about 4 weeks ago following a service, but been left in the cold since then.
Have spark and fuel pump running fine also.
New plugs and Leads at service as well
Can hear it wanting to start with a few little coughs but no joy!!
RAC been out but he was stumped as well!
He was mucking about with the distributed caps and now worried plugs in wrong way...
Should it be cylinder 1 in top right hand plug, 2 in top left, 3 in bottom right and 4 bottom left??
If you see what I mean?
Any ideas?
Many thanks Tony!!
Plugs in the clockwise direction 1 through 4, so that sounds ok?
New spark plugs and then the ones that were working, tested again and both sets spark fine!
Fuel pulled through into carbs without using up battery as well - new battery in fact so decent power from it.
All very mysterious??
I’m in the Glos area
Plugs in the clockwise direction 1 through 4, so that sounds ok?
New spark plugs and then the ones that were working, tested again and both sets spark fine!
Fuel pulled through into carbs without using up battery as well - new battery in fact so decent power from it.
All very mysterious??
I’m in the Glos area
Is on 1,3,4,2 Rotor arm pointing at the number 1 lead so think that’s right?
I’m at a loss!!
Fuel all changed and brand new, been getting little shocks off the leads when I’ve been fiddling so think we have sparks happening??
As said earlier- did fire into life last week out of the blue and since then nothing....
I’m at a loss!!
Fuel all changed and brand new, been getting little shocks off the leads when I’ve been fiddling so think we have sparks happening??
As said earlier- did fire into life last week out of the blue and since then nothing....
Is on 1,3,4,2 Rotor arm pointing at the number 1 lead so think that’s right?
I’m at a loss!!
Fuel all changed and brand new, been getting little shocks off the leads when I’ve been fiddling so think we have sparks happening??
As said earlier- did fire into life last week out of the blue and since then nothing....
I’m at a loss!!
Fuel all changed and brand new, been getting little shocks off the leads when I’ve been fiddling so think we have sparks happening??
As said earlier- did fire into life last week out of the blue and since then nothing....
Gassing Station | Caterham | Top of Page | What's New | My Stuff