Boot release Leaver

[Alan Whitaker]

Ok found all the bits for the boot except the leaver and cable. I don't think these were ever with the bits I got, so need a picture of the leaver or if anybody know the car it came from.

Thanks

Alan

[Alan Whitaker]

well that's buggered that then, ok will have to look on ebay for something to use.

Alan

[Alan Whitaker]

Think that's what I will do Mike, may just put a manual in as well, just in case.
Alan

[Alan Whitaker]

Just been to the yard and found a fiat Punto, going to scrap so that's now off and in the workshop, long enough to fit just in front of the seat.

[Alan Whitaker]

That's me all sorted, just need to sort out a small gas lift.
Thanks all

Alan

[Alan Whitaker]

Just where I have one on order from, should be here in a few days

[Alan Whitaker]

Hi Glen, got me a Fiat Punto with a boot decal on it, will fit just in front of the seat. Will be fine and dandy

[Alan Whitaker]

Hi Glen,
Just a few last jobs ( taking forever) , just got the bonnet all lined up, boot now requiring a pull cable, have a solenoid and just making up the bracket. Doors on and locks and windows all working. Dash all finished and ready to go back in after painting. Most is done apart from installing a new ECU and TCU so that could be fun.
I am sure there will be some small things I have forgot about, I am looking for some fixings for the aluminium window channels that fix to the door, they look like self tapping screws or M4 counter sunk screws. I have some aero catches and some pin and like an R clip ones but not sure if they look right.
There is a new Plenum I need to weld but it can be done when the engine and box are out so they can paint the engine bay. I did not paint the under body and would like to lift the body off to do this, not sure if it will make any difference as it's not likely to rust is it.
Had to take a short break (4 months) due to her in doors wanting a few walls knocking down and a new kitchen and the old firm wanting work doing, other than that next job to sort out is painting at Option 1 and upholstery at Trim Unique.

Alan