oil pressure sender s3 v6

oil pressure sender s3 v6

Author
Discussion

vjay48

Original Poster:

191 posts

160 months

Friday 26th October 2018
quotequote all
Can someone tell me were to get a sender from,current one was obtained from a supplier who is no longer around. thanks

Maffe

479 posts

260 months

Friday 26th October 2018
quotequote all

phillpot

17,140 posts

184 months

Saturday 27th October 2018
quotequote all
Obviously the TVR Parts one should work perfectly, they are available much cheaper on Ebay but might be a lottery as to whether it gives the correct reading wink


Click here for very cheap oil sender unit


Lots of previous discussions can be found with a bit of searching old posts on here.

Maffe

479 posts

260 months

Saturday 27th October 2018
quotequote all
phillpot said:
…might be a lottery as to whether it gives the correct reading
I tried that lottery, costed me 11$ And i lost. Ended up with the one from Tvr-parts in the end.
Well worth the gamble thou!

vjay48

Original Poster:

191 posts

160 months

Saturday 27th October 2018
quotequote all
I have checked car is fitted with a non "tvr" sensor,i will take it to my friendly parts man , I think a decent 100 psi sender should work, I do feel that the TVR part at £60 is a bit dear. Gauge is working now the car is cold,but I think it will fail when car is hot.

vjay48

Original Poster:

191 posts

160 months

Monday 29th October 2018
quotequote all
TVR Parts don't have sender in stock. They are awaiting stock.

magpies

5,129 posts

183 months

Monday 29th October 2018
quotequote all
I purchased a 20psi oil switch and Tee piece so that I have a working gauge and also the warning light comes on at 20psi which is much much better than the standard 3psi as the engine would probably be toast at that.