Braided brake hose ....question
Discussion
If you lads e-mail me I can send a photo of the problem.
All I have is the new brass olive and 1 female nut (bought in the states)
This fits my 90 deg fitting
I already have a goodrich hose with the correct Banjo at one end but need to replace
the other end with this new female nut to give me the correct threads into the elbow
I already had difficulty obtaning a 1/2-20 Banjo and bolt for the Master cylinder
Sent off to ThinkAuto,Goodrich and BSR with no luck on these parts.
Managed to obtain the 1/2 Banjo bolt form a tractor!
Seems Wilwood made an unusual outlet size. 7/16 or 9/16 easy but 1/2" a problem
R
All I have is the new brass olive and 1 female nut (bought in the states)
This fits my 90 deg fitting
I already have a goodrich hose with the correct Banjo at one end but need to replace
the other end with this new female nut to give me the correct threads into the elbow
I already had difficulty obtaning a 1/2-20 Banjo and bolt for the Master cylinder
Sent off to ThinkAuto,Goodrich and BSR with no luck on these parts.
Managed to obtain the 1/2 Banjo bolt form a tractor!
Seems Wilwood made an unusual outlet size. 7/16 or 9/16 easy but 1/2" a problem
R
Gassing Station | Scotland | Top of Page | What's New | My Stuff