Exhaust pics of 2.8 tasmin fhc mk1

Exhaust pics of 2.8 tasmin fhc mk1

Author
Discussion

french dave

Original Poster:

315 posts

148 months

Monday 11th December 2017
quotequote all
Hi,the exhaust on the Tasmin I've just acquired seems very low about 3" off the ground.Has anyone pics of there exhaust showing the whole underside system but mainly the centre box and how it's held up/too the chassis.Whats the best sounding system to fit when replacement due? Thanks dave

french dave

Original Poster:

315 posts

148 months

Sunday 24th December 2017
quotequote all
Hi,Here's some photos of the centre section of the exhaust system fitted to mk1 fhc 1981.hope you can see it sits about 3" off the ground.i have several local speed bumps which will undoubtedly damage this if I don't find a solution.Has anyone pics of there system on an early fhc.thanks dave

french dave

Original Poster:

315 posts

148 months

Tuesday 26th December 2017
quotequote all

french dave

Original Poster:

315 posts

148 months

Tuesday 26th December 2017
quotequote all

french dave

Original Poster:

315 posts

148 months

Tuesday 26th December 2017
quotequote all

french dave

Original Poster:

315 posts

148 months

Tuesday 2nd January 2018
quotequote all
Hi,thanks Tasmin 200 -any pics of that system anywhere?

french dave

Original Poster:

315 posts

148 months

Friday 5th January 2018
quotequote all
Hi,thanks for photos popop430 -so the centre box is up in between the chassis rails.What size tail pipes do you have?Madness -please post pics it all helps! thanks guys. Dave

Edited by french dave on Friday 5th January 20:46

french dave

Original Poster:

315 posts

148 months

Saturday 6th January 2018
quotequote all
Hi ,thanks guys for the pics.Tim lux I take it the exhaust runs above the prop shaft fwd and over/alongside the gearbox.Has anyone pics of this area or drawing?