Rear caliper carrier removal (mk2 Octavia vRS)
Discussion
I did mine on my driveway. The thing that worked in the end was an 18" breaker bar that I could turn within the wheel arch but it was hard work.
I also used some proper one piece spline bits as the first attempt was with one which fitted into a standard socket and that didn't last long...
I also used some proper one piece spline bits as the first attempt was with one which fitted into a standard socket and that didn't last long...
I've done this job. I recall with the wheel off and therefore suspension unloaded the upper arm prevented access to the bolts. I.e. there wasn't space for the spline socket to fit.
So I had to reverse the car up the ramps to loosen the bolts from underneath, even then there wasnt much space to turn the breaker bar. Then i took the car off the ramps to get the wheels off to remove the bolts to change the discs.
So I had to reverse the car up the ramps to loosen the bolts from underneath, even then there wasnt much space to turn the breaker bar. Then i took the car off the ramps to get the wheels off to remove the bolts to change the discs.
Gassing Station | Suspension, Brakes & Tyres | Top of Page | What's New | My Stuff