Mitsubishi W142 (MZ312720) Replace with Pioneer but No Power
Discussion
Hi everyone,
Just joined the forum and in need of some help. I recently bought a Mitsubishi Shogun Pinin 2003 and i want to replace the standard radio/cd player with my Pioneer SPH-10BT which uses ISO connectors.
I bought a adapter on Ebay which said it was for a Shogun pinin which i assumed would work however i have no power going to the pioneer radio. Not sure if this is the correct adapter ? as i have 2 cables coming from the car and this adapter is only for 1 of the connectors.
Hopefully someone can help me please, i have added pictures of the adapter and the cables i have coming from the car.
https://ibb.co/pdSBm1J
https://ibb.co/NYKcx2s
https://ibb.co/bRMqgWX
https://ibb.co/B3y4VRv
https://ibb.co/Gt83rx4
Thanks J
Just joined the forum and in need of some help. I recently bought a Mitsubishi Shogun Pinin 2003 and i want to replace the standard radio/cd player with my Pioneer SPH-10BT which uses ISO connectors.
I bought a adapter on Ebay which said it was for a Shogun pinin which i assumed would work however i have no power going to the pioneer radio. Not sure if this is the correct adapter ? as i have 2 cables coming from the car and this adapter is only for 1 of the connectors.
Hopefully someone can help me please, i have added pictures of the adapter and the cables i have coming from the car.
https://ibb.co/pdSBm1J
https://ibb.co/NYKcx2s
https://ibb.co/bRMqgWX
https://ibb.co/B3y4VRv
https://ibb.co/Gt83rx4
Thanks J
Thank you so much for your help with this im so grateful, been struggling all day with this.
Ok looking at the adapter i got the wiring is all wrong so i will need to start again and i was hoping you might be able to help me with this please ?
Here is a picture of the Adapter again but i have removed all the wires to start again : https://ibb.co/YTP3mpJ
Im assuming the brownish is plug is for the speakers ?
What i am stuck with is the black plug, Im not sure what goes where into the 14 pin plug from the car. i have labled the cables for the black plug below.
Black = Ground / Chasis
Blue = El antenna / goes to ?
Yellow = Memory 12v / goes to ?
Orange = Illumination / goes to green and white
Red = Power 12v / Goes to ?
Iv added close up pictures of the 14 pin connector from the car if this helps
Bottom Cables : https://ibb.co/4Wd0PPq
Top Cables : https://ibb.co/3f3jzk6
Thank you so much again : )
Ok looking at the adapter i got the wiring is all wrong so i will need to start again and i was hoping you might be able to help me with this please ?
Here is a picture of the Adapter again but i have removed all the wires to start again : https://ibb.co/YTP3mpJ
Im assuming the brownish is plug is for the speakers ?
What i am stuck with is the black plug, Im not sure what goes where into the 14 pin plug from the car. i have labled the cables for the black plug below.
Black = Ground / Chasis
Blue = El antenna / goes to ?
Yellow = Memory 12v / goes to ?
Orange = Illumination / goes to green and white
Red = Power 12v / Goes to ?
Iv added close up pictures of the 14 pin connector from the car if this helps
Bottom Cables : https://ibb.co/4Wd0PPq
Top Cables : https://ibb.co/3f3jzk6
Thank you so much again : )
Gassing Station | In-Car Electronics | Top of Page | What's New | My Stuff