Cobra 802T Immobiliser

[joey0027]

Hi

Could anyone offer some advice on programming a new Cobra touch key? I have one working key at present & believe this is needed to add a new key.

Many thanks.

[joey0027]

Anyone had any experience of programming another Cobra model, perhaps the same method will work with the 802T.

Many thanks.

[joey0027]

Somebody suggested ignition on/off 3 times, on again, touch woking fob & then touch new fob but this was unfortunately to no avail.

Can anybody offer any further help??

Many thanks.

[joey0027]

Many thanks for your post.

I can confirm that I did disarm the system but I am unable to get the solid light after turning the ignition on/off 3 times. I presume that I should only be going to the second position on the ignition?

Thanks again.

[joey0027]

There are 2 blue dip switches on the back of the immobiliser unit marked 1 & 2...are these anything to do with the programming process?

Many thanks.

[joey0027]

Many thanks.

I sent Cobra a message several weeks ago but unfortunately have received no reply...I'll try again & let you know how I get on.

Thanks again.

[joey0027]

All sorted now thanks to the kind help from a Cobra installer. The dip switches do play a part in the programming process so if anyone in the future needs any assistance please feel free to message me.

Many thanks for all your posts.