I need to 'unglue' my plane - help?
Discussion
I'm not going to go into too much detail here, but basically I've bought an r/c model aircraft shell into which I am putting in some existing electrics. The shell is made from polystyrene.
I've balls up in glueing a balsa plate in the wrong position inside the plane and only realised now it's assembled. The outcome is the battery tray is too shallow for the battery.
The plane has been glued together with 5 minute Epoxy. Anyone have any tips on how to get the plane apart again so I can reseat the balsa platform without destroying the plane? I've not tried it yet, but can only think to cut the seams with a scalpel, but I know it's not going to be the easiest job in the world
I've balls up in glueing a balsa plate in the wrong position inside the plane and only realised now it's assembled. The outcome is the battery tray is too shallow for the battery.
The plane has been glued together with 5 minute Epoxy. Anyone have any tips on how to get the plane apart again so I can reseat the balsa platform without destroying the plane? I've not tried it yet, but can only think to cut the seams with a scalpel, but I know it's not going to be the easiest job in the world
Gassing Station | Scale Models | Top of Page | What's New | My Stuff