s6 audi 4.2 v8 in my Ultima gtr. which gear box can fit in

s6 audi 4.2 v8 in my Ultima gtr. which gear box can fit in

Author
Discussion

bamsetand

Original Poster:

51 posts

139 months

Wednesday 17th October 2012
quotequote all
hello everyone..
i read many of the topics about fitting a audi v8 in a ultima.which was helpful .. but need to know which gearbox would fit ..

since i am almost finished in building the ultima. which i bought without engine and gear.

but i have desided to try the audi engine which seems cheaper and easier?
anyhow my doubt is concerning the gearbox, most v8 comes standard with automatic 4x4(quattro) transmission.
if possible to fit the quattro gearbox in length, would it be possible to use only the front axle and block the rear axle.
any advice about the gearbox would be very appreciated.

best reg.
bamse...from denmark


bamsetand

Original Poster:

51 posts

139 months

Thursday 18th October 2012
quotequote all
hey thanks for the illustration
so as i can see rear space is needed to fit the quattro.
which is the big question ... is there another way to shorten the quattro box as on this pic.
http://rejsa.nu/forum/viewtopic.php?t=44152&po...

nevertheless can i ask you what the total meassure lenght on yours with gear.

bamsetand

Original Poster:

51 posts

139 months

Thursday 18th October 2012
quotequote all
sorry i am new in forums .. i do not yet know what pm means?
any i have meassured the space from end of the chassis to mid rear wheel.
max is 70 cm. and total room is 170cm in lenght.
best reg.

bamsetand

Original Poster:

51 posts

139 months

Friday 19th October 2012
quotequote all
well at first i wanted to make it electrical. but to gain the horsepower from electrical motor is rather expensive .. then secondly i am a jaguar lover. and if i had the choice i would use a v12 5,3 since it got momentum as does chevy.. but gearing seems to be problematic without the use of the g50 box from porsche .

but i am just thinking about the audi..
i am open ears. towards all of you more experienced ultima people which why all advice is good..
i hope to hear some alternatives.

bamsetand

Original Poster:

51 posts

139 months

Friday 19th October 2012
quotequote all
cooberpedy said:
If you stick to an AUDI engine, why not considering a V10?
The install may be as complex or easy as the V8 install, but the result
will be quite unique.
Afaik it was done before by a dutch forum member....

V10 rules!thumbupears
well hell yes v10 would be nice..
but i hope a v8 would do for me..but without a doubt V10 would rock.

bamsetand

Original Poster:

51 posts

139 months

Friday 19th October 2012
quotequote all
did anyone use the bmw 750il v12 engine ?
i read it goes well with a audi box?

bamsetand

Original Poster:

51 posts

139 months

Saturday 20th October 2012
quotequote all
cooberpedy said:
BMW v12, nice engine, if you want one, i have a 750i for sale!

If you plan to use a Jaguar engine... i would recommend using the
AJ8 supercharged V8, very compact, not heavy and easily tunable, gives reliable power. I have a XKR as one of my daily drivers.

Actually this engine was on my list too, when i had to decide which one to use for my build. Next on my list was the Porsche 4.5l turbo V8.....
It's up to you......
which did you end up with? .i mean your first choice .. and what made you deside it was good for you.


bamsetand

Original Poster:

51 posts

139 months

Saturday 20th October 2012
quotequote all
Rusti Evo said:
If you were thinking of the Jag then V8XS make some nice adapter plates, RS4 clutches etc. fitting onto the audi box.
hey rusti
sound like you know much about it... tell more... which gearbox fwd og the quattro?

about the audi v8 with quattrobox.. complications? is it only the engine fit and gear length that is the problem.. would there be any problems running a complete engine as it is out of a audi?

best reg.

bamsetand

Original Poster:

51 posts

139 months

Saturday 20th October 2012
quotequote all
Rusti Evo said:
O1X gearbox from FWD tdi. Small, light and implausibly cheap. A new one was sourced recently for £1600!! The advantage of using RS4 clutch etc. is that you won't get any mismatches and heavy clutch/starter motor nasties.

Steve Smith in UK has done a few Audi V8/Audi box Ultimas now and they are all good.
thanks rusti i will look deeply in too this combination..
is this steve person in this forum?
i hope to find a good combination and spend my winter time with.

bamsetand

Original Poster:

51 posts

139 months

Saturday 20th October 2012
quotequote all
i found this table of the rotio
2003 A4 TDi ratios

Final drive
32 : 9 = 3.556

1st gear 33 : 9 = 3.667

2nd gear 39 : 19 = 2.053

3rd gear 37 : 27 = 1.370

4th gear 32 : 31 = 1.032

5th gear 28 : 35 = 0.800

6th gear 25 : 38 = 0.658

Reverse gear 34 : 10 = 3.400

bamsetand

Original Poster:

51 posts

139 months

Sunday 16th June 2013
quotequote all
hi mates
So i am back and got my self an audi v8 engine and ready to begin.

but recently i look at a UK site http://leeds.craigslist.co.uk/
and found so many amazing engines for sale and would also want to buy since it is rather inexpensive prices compared to denmark. but i had no luck getting in contact with the sellers. so my question:
i will
1) are these adverted engines and parts real?
2) did any of you buy from these listed ads.
3) would it be safe to buy an engine from the craigslist?

anyhow in regards of the the audi v8 in the ultima i will add some photos of the development and progres next month.

best regards
alex

bamsetand

Original Poster:

51 posts

139 months

Thursday 20th June 2013
quotequote all
wau!! that is realy a nice engine room you got..and it does look cool with the throttle body...
i wonder how many bhp the throttle bodies giv extra or is it more for the sound of it :-)

many thanks for the motivation to continue with my work on audi v8 in my ultima.. ihope to be ready before autumn or at least before winter.

best reg.


bamsetand

Original Poster:

51 posts

139 months

Monday 24th June 2013
quotequote all
Hey alez. can you add some more photos of your engine room.please.
best reg.

bamsetand

Original Poster:

51 posts

139 months

Monday 8th July 2013
quotequote all
hey Alez
that is realy a nice fit you got with the engine etc. But i seemed to notice are gtr has some special style? i mean to hood seems to have a window can you please let us see your cool re-styling?thumbup
also the interior looks a bit upgraded ?

best reg.


bamsetand

Original Poster:

51 posts

139 months

Thursday 11th July 2013
quotequote all
WAU that looks so awesome :-P alez

i am making glass in the rear sides of the hood to make the car more graphicly horizontal and visualy low. i never did like heckspoilers on a car but car just looks awesome.

where did you get this kit rear kit and mirrors?
best reg.

bamsetand

Original Poster:

51 posts

139 months

Saturday 13th July 2013
quotequote all
Storer said:
Is this the look you are going for?





Paul
HO HO HO wauu ..that looks awesome paul... WELL yes i would wanner get such rear but i better wait for santa claus. Do you have site for those mirrors since i am NOT!! mounting the standard mirrors they just dont fit visual.( i think).

yes my white beast is a ultima gtr from 2009 it just took me too long to build and i am not even ready yet(((.

i will add some photos in some weeks. i am in paris now .. so if any ultima owners in paris and want to show off his/her car? that would be great to meet up.
best reg.
alex

bamsetand

Original Poster:

51 posts

139 months

Saturday 13th July 2013
quotequote all
thanks paul



best reg.

alex

bamsetand

Original Poster:

51 posts

139 months

Monday 1st December 2014
quotequote all
Hi everyone
sorry for the long absent. during the time i have build and build on my ultima with the audi engine and gearbox all works well: almost i have some small issues regarding my reverse gear on the 01E box and i have issues connecting the tachometer and ultima speedometer too the audi speedo:sender how i do get the ultima speedometer to work on a audi sender? secondly how do i get the tachometer working since i do not know where or what to connect it to. i was told at audi that their cock pit readings is in 5 volt so it will not work with the 12volts ultima clocks. have anyone an idea to solve this or any alternativ.
best reg,
alex

Edited by bamsetand on Monday 1st December 17:58