Unpacking the crate - removing prefit parts...

[huzilulu]

Hi Guys

The crate finally arrived today, and I started unpacking the boxes and trying to move the chassis to the dolly after removing all body parts... and I'm already stuck!

I have removed the front and rear clips, and now am trying to remove the doors and center sections, and will finally remove the side pods..

I cannot get the doors to come off - I know I need to remove the 4X13mm bolts from inside the door skin, but I just cannot find a way to get my hand down there - any tips?

Also, how do I get the center section off once doors are out? I have removed the rivets the factory put, and am trying to remove the bolts from the access panels - but again am unable to do so. I called the factory are they said to remove the ball joint of the door piston from the aluminum bracket, and then to remove the aluminum bracket to get access to the bolt holding the center section to the side pod - but I cannot get the ball joint off the bracket... again any tips?

Thanks

[huzilulu]

Cannot get more than one pic in a post

[huzilulu]

Thanks! Was able to get it off in a second with that tip! Now how do I get the clip back on? It is impossible to reinstall...

[huzilulu]

Lol... I didn't want to be forcing anything together this quickly.. but I've realized I can be a little more 'firm' doing things and it won't break anything...