wheel speed sensors
Discussion
I will be installing traction control on my new GTR build. I have found speed trigger wheel .com located in England. They advertise a trigger specifically for the Ultima. Has anyone used these if so how did they fit? Which sensor did you use and I assume you built your own sensor mount but if not where did you find one. Lee
The new GTR will be run on a Motec 130. Pretty cool, we are using a Motec ECU connect by can bus to a Motec PDM and a Motec dash. Also employing a Summit wireless steering wheel with the Summit receiver hard wired to the PDM. This combination makes for a very adaptable system for instance with the turn signals if you bump the turn signal that could be a lane change of 5 or more seconds, if you hold the same switch for say 2 seconds then it becomes a turn signal that will run until you bump it again. The point being that the summit is a great system but the Motec PDM really widens the possibility's of what you can control with 8 buttons. The ultimate goal is to control everything but the A/C through the steering wheel. The A/C controls are on the side of the interior next to the down bar in front. This car is built with a completely removable dash one motor sports multi connector cannon plug on the dash and two bolts and all of the dash from a inch behind the window back comes out with two bolts. now any issues with the A/C or pedals, pull the dash and go to work without the help of a 9 year Japanese girl to crawl up underneath the dash. More tricks to come on this build, after 9 years of building and living with a GTR and helping two friends with ideas on their cars I'm feeling pretty confident that this thing is going to be a badd ass motor scooter when its finished. lee
Gassing Station | Ultima | Top of Page | What's New | My Stuff