problem traction

[845ste]

lately in the circuit in the tight corners with the 2nd and 3rd gear I have a lot of traction problems.

my friends with gt3 and ferrari scuderia have a much lot of traction out of corners.

Do you have any special adjustments to help a good traction ?

in front I adjusted the soft shock absorbers (good for braking) and rear it is quite hard.

I'm wrong?

the cornering speed is excellent but the traction no !!!
thanks for the answers

[845ste]

ciao, i have g52 with LSD.
toyo semislick with 1.5 bars-
original parameters (toe, ecc) factory..

maybe i have to change something at the rear?
thanks

[845ste]

yes but here no one has problems in the track at the exit of tight turns in 2/3 vs Gt3 / Mac / other????
or if there is any particular adjustment to help traction?
thanks

[845ste]

sway bar? original gtr not have.

my problem is not the cornering speed in "support" without accelerating - neutral - (is ok) but the lack of traction on the exit in 2/3 gear. I can not accelerate.

it seems that rear you lacks weight that keeps the tires crushed to the ground.

maybe I have the soft shock absorber adjustment?

instead the 911 yes.(no TC)

[845ste]

ciao Craig i have 594hp .and toyo semislick at 50% of new.
do you not have prob with your ls7? 700 hp?
only exit from tight curves.
have you original factory geometry ?

[845ste]

thanks all.

i use 1.5bar at cold.

yes i use 3 but often in these curves it's not good, for many reasons.

which settings geometry do we use the gtr in track?

it would be interesting to compare the various settings.

probably my 50% and 4 years old toyo are already sold out.

[845ste]

I agree. LSD has a delay in the intervention already originally.
probably, being also worn and calibrated for a lot of weight, it intervenes badly.