Coaxial output from DVD or BD player - question about bits
Discussion
I have an old Sony DVD player (DVP-NS905V) and I also have a Sony BluRay player (BDP-S550).
I have a few music video DVDs and a couple of them state 24bit PCM audio on the covers however...
When playing said DVDs and taking an audio feed from the coax output, I'm only getting 16/44k
Looking in the setup for both players, there is an option "48kHz/96kHz PCM - 96kHz/24bit" which I have set - but this makes no difference.
From what I can tell - it looks as though the coax output is limited to 16/44 - is this correct?
I can't find anything in the specs that confirms this.
Also - I seem to recall several moons ago reading a review of DVD players where the selling point for them was the fact they *do* actually output 96kHz so I suspect my players are limited in this respect?
I have a few music video DVDs and a couple of them state 24bit PCM audio on the covers however...
When playing said DVDs and taking an audio feed from the coax output, I'm only getting 16/44k
Looking in the setup for both players, there is an option "48kHz/96kHz PCM - 96kHz/24bit" which I have set - but this makes no difference.
From what I can tell - it looks as though the coax output is limited to 16/44 - is this correct?
I can't find anything in the specs that confirms this.
Also - I seem to recall several moons ago reading a review of DVD players where the selling point for them was the fact they *do* actually output 96kHz so I suspect my players are limited in this respect?
@tankplanker - I'm plugging into an Audiolab Q DAC - it supports up to 192kHz (2 channel of course) so should be no issue there.
@Angrybiker - I was beginning to think that ripping was the solution - however even though my 2 channel setup relies largely on streaming flac, I have no (easy) means of streaming video, and I'm reluctant to start messing about with more stuff.
As these DVDs are very rarely watched, I was just looking to extract the audio, hence the tests to see what the bit rates were.
Would I even hear the difference between 24/96 and 16/48 - I doubt it!!
It just seemed rational to rip them to the highest bit rate available hence the testing.
I might just hit Ebay and buy a Pioneer DVD737 or similar, as following a bit of research, it looks as though these will output 96k.
Or I could just rip them and then extract the audio - however at least one of them has a lousy layout, in that the individual songs are not set out in chapters, so you need to view it to select the tracks...
@Angrybiker - I was beginning to think that ripping was the solution - however even though my 2 channel setup relies largely on streaming flac, I have no (easy) means of streaming video, and I'm reluctant to start messing about with more stuff.
As these DVDs are very rarely watched, I was just looking to extract the audio, hence the tests to see what the bit rates were.
Would I even hear the difference between 24/96 and 16/48 - I doubt it!!
It just seemed rational to rip them to the highest bit rate available hence the testing.
I might just hit Ebay and buy a Pioneer DVD737 or similar, as following a bit of research, it looks as though these will output 96k.
Or I could just rip them and then extract the audio - however at least one of them has a lousy layout, in that the individual songs are not set out in chapters, so you need to view it to select the tracks...
They're 'standard' DVD video discs.
I to have been down the DVDA route (never again!).
Most (all?) of the disks have a selectable stereo sound track - in fact even back when I played them through my surround system I always selected the two channel option as the DTS 5.1 sound was quite unnatural.
I to have been down the DVDA route (never again!).
Most (all?) of the disks have a selectable stereo sound track - in fact even back when I played them through my surround system I always selected the two channel option as the DTS 5.1 sound was quite unnatural.
Just to update this.
A little more research has revealed that some older players were capable of 24/96 output from the coax socket, however this could still be restricted to 24/48 by the author of the DVD.
So it's probably pretty pointless even trying to use a player to rip the audio tracks.
I ripped one of the DVDs last night, and the audio is only 24/48 when played back in VLC.
A little more research has revealed that some older players were capable of 24/96 output from the coax socket, however this could still be restricted to 24/48 by the author of the DVD.
So it's probably pretty pointless even trying to use a player to rip the audio tracks.
I ripped one of the DVDs last night, and the audio is only 24/48 when played back in VLC.
Gassing Station | Home Cinema & Hi-Fi | Top of Page | What's New | My Stuff