Discussion
Building a Raspberry Pi Media server and want to be able to use my Harmony remote to control it.
I'm using a pretty standard component IR receiver : Vishay TSOP4838 (https://www.vishay.com/docs/82459/tsop48.pdf).
My question is about mounting it. The RasPi box is grey plastic approx 1mm thick. Presumably I need to make a hole in the box for the receiver to see the remote? I assume that the part that needs to be seen is the hemispherical lump on the receiver, and that If I drill a hole of similar diameter and mount that lump in the hole it should work?
Thanks, James
I'm using a pretty standard component IR receiver : Vishay TSOP4838 (https://www.vishay.com/docs/82459/tsop48.pdf).
My question is about mounting it. The RasPi box is grey plastic approx 1mm thick. Presumably I need to make a hole in the box for the receiver to see the remote? I assume that the part that needs to be seen is the hemispherical lump on the receiver, and that If I drill a hole of similar diameter and mount that lump in the hole it should work?
Thanks, James
Gassing Station | Home Cinema & Hi-Fi | Top of Page | What's New | My Stuff