Door hinging issue

[Simpo Two]

Can't get my head round this...

I have a pair of doors that currently open outwards - view from outside and above:



View from inside:



The fact that both doors open outwards is very irksome as they get in the way, so I was pondering a way to make them open inwards:



Obviously if I'm not to sacrifice the doorframe, some kind of clever hinge would be needed (I'm aware the door would have to be lowered as well.

I found this kind of hinge:


http://www.screwfix.com/p/eclipse-spring-hinges-sa...

But would it work, is it suitable and if not can anyone suggest another way?

Edited by Simpo Two on Saturday 13th October 15:43

[Simpo Two]

MrV said:

Any reason why you cant just use the existing hinges on the inside but folded to an L shape ?

It would look bad on the outside as it would set the doors in about 2". There's also a hatch on top which currently ends flush with the doors and I'd like that to continue.

[Simpo Two]

It is on a boat, but on a very flat river, and I think it's built like that simply because it's the easiest way to do it. In fact I asked during construction whether it could be changed, and they said not.

Plan B is to make it bifold (folding outside to the right), so at least only the navigator is trapped in his seat by the open door and not me as well! They look lovely but are a thundering nuisance.

[Simpo Two]

MrV said:

The door would be in the same position it is in now ,as a picture paints a thousand words.new position of hinges I've marked in blue



Down side to this is you lose a little access

Thak MrV, I see what you mean. Yes, that was an early and easy idea but as you say it would lose over 2" of doorway width, which is already not overly wide. The doors need to fold back inside or not at all.

I was trying to juggle the 3-fold hinge with the profile in my head, trying to figure out how it would need to be attached to work, if it would work at all, but ran out of mental RAM!