Swift sport clunk on weight transfer

Swift sport clunk on weight transfer

Author
Discussion

silles

Original Poster:

48 posts

73 months

Sunday 18th October 2020
quotequote all
I have a 2014 Swift Sport which started to make a clunking noise on weight transfer. ( come off / on gas in lower gears)

Facts:
- car drivers fine
- clunk on weight transfer, worst in lower gears
- no clunk going over speed bumps or cornering.
- no clunk when not in gear and just break.
- Suzuki had a look at the car and they could not find the cause.
- other garage says lower gearbox mount has a slight play.
- car is 1.6 2014 with 44k miles.

Any clues where to look or how to figure out this?


silles

Original Poster:

48 posts

73 months

Sunday 18th October 2020
quotequote all
thebraketester said:
silles said:
I have a 2014 Swift Sport which started to make a clunking noise on weight transfer. ( come off / on gas in lower gears)


- other garage says lower gearbox mount has a slight play.
I would say start by replacing that mount/bush
i took the car to suzuki to replace it, but they said it's fine. The garage who said it has a play wanted a whopping 440+VAT. 2.5 hours of labor. Rip off. Suzuki wants 1 hour labor but they say it's fine and no need to replace and i should wait for it get worse.


silles

Original Poster:

48 posts

73 months

Monday 22nd February 2021
quotequote all
Update: still have the problem, nobody can find the cause . frown

but made a new observation:

I had less clunks or almost none when temp was sub-0.
Now it's getting worse again as temp is on the up.

I guess it's something which gets tighter with the cold weather.

Still no idea what it could be.

silles

Original Poster:

48 posts

73 months

Tuesday 23rd February 2021
quotequote all
E-bmw said:
Where is the "clunk" coming from?

Whether Suzuki say it is OK or not, I would be changing anything not right as only a very small amount of play is enough with 100bhp effort behind it.
that is the 1 million pound question. Nobody was able to identify the source of the clunk.
I was told to wait until it gets worse. lol
I cannot just start to replace all components random.