HID conversion kits?
Discussion
To cut a long story short, My bike is classed as a moped so on the M.O.T all the tester checks is function and rough alignment. I've now bought the ballast kits and the bulbs for £30 the pair
My bike is only meant to have 35w headlight bulbs in and I couldn't find 35w H3 halogens but the ballast packs only draw 35w, the same as the original sealed eam unit which I had to replace with a normal pair of lights as the dipped beam had gone.
And I also have been going through headlight bulbs like anything. I have blown 2 good osram new halogens in 2 weeks. I've checked the voltage on the output wires even at revs and it peaks at about 13.3 but it's kicking out AC rather than DC as the ballast packs require so I've also wired in a diode bridge rectifier to the dip and main beam wiring.
My bike is only meant to have 35w headlight bulbs in and I couldn't find 35w H3 halogens but the ballast packs only draw 35w, the same as the original sealed eam unit which I had to replace with a normal pair of lights as the dipped beam had gone.
And I also have been going through headlight bulbs like anything. I have blown 2 good osram new halogens in 2 weeks. I've checked the voltage on the output wires even at revs and it peaks at about 13.3 but it's kicking out AC rather than DC as the ballast packs require so I've also wired in a diode bridge rectifier to the dip and main beam wiring.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff