997 Headlamp Adjustment???
Discussion
997 said:
I'll help you.
Go into boot compartment and unscrew plastic nut (near boot light / or opposite side one) and pull carpet away from inside of boot to expose a couple of holes with rubber flaps, and a bigger hole with a rubber bung in.
Remove bung, insert the socket wrench from toolkit(small hex) into the hole and rotate through 180 degrees. On the nearside headlight you basically rotate from 9o'clock through to 3o'clock.
Headlight is unlocked and you can slide out to the front.
Unscrew the 4 screws and press the 3 release tabs to expose the inside of the headlamp.
You will see the small tab clearly which is set to T for overseas and O for home.
Reverse process and make sure you rotate wrench back through to 9o'clock position - it makes quite a positive clunk!
Cheers!Go into boot compartment and unscrew plastic nut (near boot light / or opposite side one) and pull carpet away from inside of boot to expose a couple of holes with rubber flaps, and a bigger hole with a rubber bung in.
Remove bung, insert the socket wrench from toolkit(small hex) into the hole and rotate through 180 degrees. On the nearside headlight you basically rotate from 9o'clock through to 3o'clock.
Headlight is unlocked and you can slide out to the front.
Unscrew the 4 screws and press the 3 release tabs to expose the inside of the headlamp.
You will see the small tab clearly which is set to T for overseas and O for home.
Reverse process and make sure you rotate wrench back through to 9o'clock position - it makes quite a positive clunk!
Gassing Station | Porsche General | Top of Page | What's New | My Stuff