Help please fault code 4440
Discussion
Hi,
Sorry I have a fast ball.
I am on my way down to Sussex for Loch Lomond. Got the usual PSM/ABS failure lamp twice so far ( 300 miles to now). Stopped of at relatives for tonight in Chester.Checked with my durametric ABS fault code 4440.
I cant find any ref in the manual.All I know is steering angle sensor failure. Cleared fault OK. BUT...Cant find anything about 4440.
Does any one know where to find it in the workshop manual.
Thanks
Frank
Sorry I have a fast ball.
I am on my way down to Sussex for Loch Lomond. Got the usual PSM/ABS failure lamp twice so far ( 300 miles to now). Stopped of at relatives for tonight in Chester.Checked with my durametric ABS fault code 4440.
I cant find any ref in the manual.All I know is steering angle sensor failure. Cleared fault OK. BUT...Cant find anything about 4440.
Does any one know where to find it in the workshop manual.
Thanks
Frank
Martian O said:
Had a quick Google Frank and came up with this which I presume you know already.
Thanks Martian ,No I didn't know this.That explains why I cant find it in the workshop manual. I was getting the ABS/PSM alarm earlier on this year but I cleaned the MAF, not had it since, until now. This is the first time it has done it since I bought the Durametric so I wonder if code 4440 has been the culprit before.
I am heading on down further tomorrow, problem is I would like to check the durametric before switching off the engine, but on the hard shoulder that's just not a good idea and you have to quickly switch the engine off to get the ABS/PSM to switch back on!!
Frank
Gassing Station | Porsche General | Top of Page | What's New | My Stuff