Digi-tec 360 - 440 BHP!
Discussion
Hi Guys,
anyone read the December issue of FORZA magazine?
There is a 4 page article about the owner of Digi-tec in Germany, Michael Pullmuller (great name!).
He's personal cars are - wait for it - a 360 Modena
AND a 360 Spider.
Both with Digi-tecs ECU upgrades that took 1 year to complete first time round to make it just right. Get this - you get another 30-40 BHP, take the top speed up to 198 actual speed, rev limiter raised to 9200 and the best part, a 2 year engine and drive train warranty for £200 !!!
All for what I can work out to be either £3500 fully fitted
or 2 x £750 for replacement ECUs that then need to be fitted by yourself. Important to have them fitted by Digi-tec though as they tailor to YOUR car - it is NOT a 'blanket chip' that may or may not give 80% only.
Apparently they give 5 years warranty on the ECUs and 2 on the car itself following the work carried out.
According to Digi-tecs owner, who now runs 2 x 360s both modified (in addition to the many customers cars modified since 2000), the engine can easily rev to 9200 and by raising fuel input at high revs it actually runs cooler and better as the stock car runs a slightly lean mixture at high revs.
Furthermore, Digi-tec can lower your stock car on the original dampers by 25 mm AND put a specially designed spacer between hub and wheel to widen the track for enhanced stability. It also looks darn good I can tell you. Look at your 360 and you will see the alloys being slightly 'inside' the wheel arches rather than filling them out completely following lowering and widening track.
Apparently this is better than fitting 19 inch Alloys as they do the handling no favours..
Just thought I would share this with everyone in case you hadn't seen the article.
I'm VERY tempted....
B
anyone read the December issue of FORZA magazine?
There is a 4 page article about the owner of Digi-tec in Germany, Michael Pullmuller (great name!).
He's personal cars are - wait for it - a 360 Modena
AND a 360 Spider.
Both with Digi-tecs ECU upgrades that took 1 year to complete first time round to make it just right. Get this - you get another 30-40 BHP, take the top speed up to 198 actual speed, rev limiter raised to 9200 and the best part, a 2 year engine and drive train warranty for £200 !!!
All for what I can work out to be either £3500 fully fitted
or 2 x £750 for replacement ECUs that then need to be fitted by yourself. Important to have them fitted by Digi-tec though as they tailor to YOUR car - it is NOT a 'blanket chip' that may or may not give 80% only.
Apparently they give 5 years warranty on the ECUs and 2 on the car itself following the work carried out.
According to Digi-tecs owner, who now runs 2 x 360s both modified (in addition to the many customers cars modified since 2000), the engine can easily rev to 9200 and by raising fuel input at high revs it actually runs cooler and better as the stock car runs a slightly lean mixture at high revs.
Furthermore, Digi-tec can lower your stock car on the original dampers by 25 mm AND put a specially designed spacer between hub and wheel to widen the track for enhanced stability. It also looks darn good I can tell you. Look at your 360 and you will see the alloys being slightly 'inside' the wheel arches rather than filling them out completely following lowering and widening track.
Apparently this is better than fitting 19 inch Alloys as they do the handling no favours..
Just thought I would share this with everyone in case you hadn't seen the article.
I'm VERY tempted....
B
No problem Kenneth. I'll bring some copies with me + the original. You've got to see that 360 spider lowered and widened... awsome.
By lifting the rev limiter to 9200 you obtain another 30-40 BHP. Add a tubi to that and you're talking serious performance.
Z, do you want me to send you a copy? or just check out
www.digi-tec.net ?
cheers
B
By lifting the rev limiter to 9200 you obtain another 30-40 BHP. Add a tubi to that and you're talking serious performance.
Z, do you want me to send you a copy? or just check out
www.digi-tec.net ?
cheers
B
I am going to finish this thread by saying;
Manu at Scuderia can actually give a 360M 440 BHP with relative ease.
Tubi + Group M Carbon Dual air intake + Group M ECU =
roughly 430/440 BHP apparently - at a price rather a lot less than the Digi-Tec upgrade...!
Any takers? I'm thinking....
B
Manu at Scuderia can actually give a 360M 440 BHP with relative ease.
Tubi + Group M Carbon Dual air intake + Group M ECU =
roughly 430/440 BHP apparently - at a price rather a lot less than the Digi-Tec upgrade...!
Any takers? I'm thinking....
B
Gassing Station | Supercar General | Top of Page | What's New | My Stuff