Discussion
Right. Thanks for the responses. As always with car tweaking there seems to be much more to it than meets the eye. At the moment I have fitted some crappy silicone leads which no doubt are copper-cored and the radio is fine. It sounds like as long as there is enough shiedling, the interference shouldn't be too bad. Surely the likes of Magnecor and Nology wouldn't be too successful if all their products caused radio interference? Failing getting hold of the Nology's I'll make do with some Magnecors I think. I'm sure the 10mm ones are great but the 8.5mm KV85's are about the limit as to what I wish to spend. £80 gets me some 8.5's:
"KV85 COMPETITION CABLE
Primarily designed for racing engines using racing ignitions,turbocharging and supercharging.Entire jacket made from aerospace extreme heat-resistant silicone rubber.Exclusive Magnecor 2.5mm Metallic
Inductance Suppressed Conductor will suppress EMI indefinitely,allowing this
cable to be used on road vehicles with any ignition and LPG gas conversions.Can be fitted into most original lead holders."
Oooo racing engines. I'm sure I'll be fine!!
"KV85 COMPETITION CABLE
Primarily designed for racing engines using racing ignitions,turbocharging and supercharging.Entire jacket made from aerospace extreme heat-resistant silicone rubber.Exclusive Magnecor 2.5mm Metallic
Inductance Suppressed Conductor will suppress EMI indefinitely,allowing this
cable to be used on road vehicles with any ignition and LPG gas conversions.Can be fitted into most original lead holders."
Oooo racing engines. I'm sure I'll be fine!!
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff