M52TUB23

Author
Discussion

Bunoaica Ionut

Original Poster:

5 posts

39 months

Tuesday 23rd February 2021
quotequote all
Hello guys!I have an M52TUB23 on my e36 and I need more power!What intakes I can put on this engine?From m54b30?Give me an ideea People! 😁😁

Bunoaica Ionut

Original Poster:

5 posts

39 months

Monday 1st March 2021
quotequote all
BFleming said:
M52TUB23 on your e36? I don't think you do. You might be referring to the M52TUB25 or M52TUB28, but they were never fitted to the E36 (the Z3 and E46 got them).
On the off chance you have a M52TUB28, you can fit the M54B30 inlet manifold to them, but you need to retain your cable-actuated throttle body from your M52TUB28 and buy an adapter plate to allow it to fit.
I mounted that engine with the e46 electric wires from a 323ci e46 coupe..

Bunoaica Ionut

Original Poster:

5 posts

39 months

Monday 1st March 2021
quotequote all
Andy70 said:
I had an e36 325i and a 328i once and back in those days everything was far simpler, now there is a variation of a variation of an engine but back then you always knew a 323, 325 and 328 as they all had 2 tips on the exhaust anything less was 1... The 323 was a 2.5 engine but without the variable valve timing, the 325i had the variable timing and the 328i was basically 'strangled' (due to tax reasons or something). In fact you could tune a 328i not far off a 330i by putting the 325i inlet manifold on, (the 328 had the manifold from a 320i apparently) and removing the restriction in the air filter housing. but all of this was only a few horsepower, buy a faster car if you want power, or just enjoy what you got. I believe turbo kits may be available as they are for the e46 lol.. But you need to be sure what you have. If its a 320, then give up :-). I've been trying to make cars go faster for years and I've learned that anything naturally aspirated gains minimal amounts even if you chuck a lot of money at it
I have a friend with 328 e36 with intakes 330 on admission and 325 on exhaust,a good soft and another little modifications and easy beat 300-350hp diesel cars on 402m

Bunoaica Ionut

Original Poster:

5 posts

39 months

Saturday 6th March 2021
quotequote all
Wbabm31070ez71249 this is the vin number..everyone says it's m52tub23..I dont know how to check if it's m52tub25

Bunoaica Ionut

Original Poster:

5 posts

39 months

Saturday 6th March 2021
quotequote all
Andy70 said:
Bunoaica Ionut said:
I have a friend with 328 e36 with intakes 330 on admission and 325 on exhaust,a good soft and another little modifications and easy beat 300-350hp diesel cars on 402m
Eh?? you'd be lucky to get much more than 220bhp with a e36 328i, they were 190bhp standard if I recall?? so a few upgrades still wouldn't make it much quicker, so to beat a car with 100bhp more?? someone is telling porkies somewhere, or was the 328 supercharged? or the diesel was 90bhp really???
Bro,watch on internet about bmw aspirated card.. I can easy beat 220hp diesel cars with my 170hp bmw..I can send you a video with my stock car beating audi tt 1.8t BAM engine on 402m..