3M Walnut wrap radio panel
Discussion
Hedgehopper said:
Snap! So am I, this afternoon in fact. Are you using the 3M Di-Noc stuff from the eBay site in Poland or Hungary or wherever?......
http://www.ebay.co.uk/itm/3M-DI-NOC-364GN-WG364GN-... Lots of different sizes.
First results look promising but for £18.00 it must be worth a try.
I first saw it here.....
http://pub25.bravenet.com/forum/static/show.php?us...
This is my attempt.....
Would like to see pictures of your car when finished.
Yes that's exactly the stuff I'm using. Prompt delivery and cheap.http://www.ebay.co.uk/itm/3M-DI-NOC-364GN-WG364GN-... Lots of different sizes.
First results look promising but for £18.00 it must be worth a try.
I first saw it here.....
http://pub25.bravenet.com/forum/static/show.php?us...
This is my attempt.....
Would like to see pictures of your car when finished.
Edited by Hedgehopper on Thursday 9th February 16:01
Edited by Hedgehopper on Thursday 9th February 16:55
It's amazing how much you can work this stuff with a little hot air gun warming.
It's actually a little darker in the flesh than the photos show. I'm realitively pleased with the result.
. Great job by the way chaps . 
[quote=caduceus]Did you get the bulbs off eBay? Linky?[/http://www.ebay.co.uk/itm/292071181006?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
http://www.ebay.co.uk/itm/201472333944?_trksid=p20...
Steve D kindly advised changing all of the bulb holders to capless in addition to the two in the rev counter that already are. The links are for the bulb holders and bulbs used. Mine already had spade terminals so crimping on the male terminals to the holders wiring made it really easy.My chip is a 98 vintage so the clocks may be different in earlier models. The bulb holders are a snug fit in the clocks but are ok. All of my attempts at buying leds for bayonet fitting were useless with many too big hence the capless fittings. Bobfathers suggestion of a higher out put bulb in the speedo is well worth considering as it is slightly duller due to the density of the instrumentation. Overall well chuffed!
http://www.ebay.co.uk/itm/201472333944?_trksid=p20...
Steve D kindly advised changing all of the bulb holders to capless in addition to the two in the rev counter that already are. The links are for the bulb holders and bulbs used. Mine already had spade terminals so crimping on the male terminals to the holders wiring made it really easy.My chip is a 98 vintage so the clocks may be different in earlier models. The bulb holders are a snug fit in the clocks but are ok. All of my attempts at buying leds for bayonet fitting were useless with many too big hence the capless fittings. Bobfathers suggestion of a higher out put bulb in the speedo is well worth considering as it is slightly duller due to the density of the instrumentation. Overall well chuffed!
ProjectChimaera]aduceus said:
Did you get the bulbs off eBay? Linky?[/http://www.ebay.co.uk/itm/292071181006?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
http://www.ebay.co.uk/itm/201472333944?_trksid=p20...
Steve D kindly advised changing all of the bulb holders to capless in addition to the two in the rev counter that already are. The links are for the bulb holders and bulbs used. Mine already had spade terminals so crimping on the male terminals to the holders wiring made it really easy.My chip is a 98 vintage so the clocks may be different in earlier models. The bulb holders are a snug fit in the clocks but are ok. All of my attempts at buying leds for bayonet fitting were useless with many too big hence the capless fittings. Bobfathers suggestion of a higher out put bulb in the speedo is well worth considering as it is slightly duller due to the density of the instrumentation. Overall well chuffed!
http://www.ebay.co.uk/itm/292071181006?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIThttp://www.ebay.co.uk/itm/201472333944?_trksid=p20...
Steve D kindly advised changing all of the bulb holders to capless in addition to the two in the rev counter that already are. The links are for the bulb holders and bulbs used. Mine already had spade terminals so crimping on the male terminals to the holders wiring made it really easy.My chip is a 98 vintage so the clocks may be different in earlier models. The bulb holders are a snug fit in the clocks but are ok. All of my attempts at buying leds for bayonet fitting were useless with many too big hence the capless fittings. Bobfathers suggestion of a higher out put bulb in the speedo is well worth considering as it is slightly duller due to the density of the instrumentation. Overall well chuffed!
Link 1 corrected, hopefully!
Gassing Station | Chimaera | Top of Page | What's New | My Stuff