Discussion
Classic Chim said:
Nope.
Best solution or at least the tidiest. If they work on landies, they’ll work on yours that lives in the garage
I’ve washed my car every week for 2 odd years when using the car daily and I used a lot of water. Easy to get replaced etc I even use the hose to wash off my stainless mesh and it’s alwys fired up instantly winter or summer.
Do you wanna see a pic :hehe,,,, well here’s one anyway
You can’t see them anyway
It’s a fit and forget and I expect them to last 10 years maybe.
The ones that fit in between the front of the plenum and exhaust look s
t if you ask me. This is just lovely jubbly 
I'm going off the packs that mount around the side / front of the plenom with the power steering Rez will need moving Best solution or at least the tidiest. If they work on landies, they’ll work on yours that lives in the garage
I’ve washed my car every week for 2 odd years when using the car daily and I used a lot of water. Easy to get replaced etc I even use the hose to wash off my stainless mesh and it’s alwys fired up instantly winter or summer. Do you wanna see a pic :hehe,,,, well here’s one anyway
You can’t see them anyway
It’s a fit and forget and I expect them to last 10 years maybe.
The ones that fit in between the front of the plenum and exhaust look s
t if you ask me. This is just lovely jubbly So it's to the rear with them as long as they fit with my new stepper
sapper said:
Classic Chim said:
Nope.
Best solution or at least the tidiest. If they work on landies, they’ll work on yours that lives in the garage I’ve washed my car every week for 2 odd years when using the car daily and I used a lot of water. Easy to get replaced etc I even use the hose to wash off my stainless mesh and it’s alwys fired up instantly winter or summer.
Do you wanna see a pic :hehe,,,, well here’s one anyway
You can’t see them anyway
It’s a fit and forget and I expect them to last 10 years maybe.
The ones that fit in between the front of the plenum and exhaust look st if you ask me. This is just lovely jubbly
Whats the gauge under your wiper blades?Best solution or at least the tidiest. If they work on landies, they’ll work on yours that lives in the garage
I’ve washed my car every week for 2 odd years when using the car daily and I used a lot of water. Easy to get replaced etc I even use the hose to wash off my stainless mesh and it’s alwys fired up instantly winter or summer. Do you wanna see a pic :hehe,,,, well here’s one anyway
You can’t see them anyway
It’s a fit and forget and I expect them to last 10 years maybe.
The ones that fit in between the front of the plenum and exhaust look s
t if you ask me. This is just lovely jubbly Classic Chim said:
Yes it’s after I fitted an Ipso oil pressure sender and wanted to be sure of the readings on the cars gauge.
I reckon behind the engine they get less heat effected. That pic is before I used some cheap dividers so they are now neater.
If they do the job as they are meant to were talking 50,000 miles of use. Hiding them away seems like a good idea to me.
Obviously if one breaks down or whatever the Plenum has to come off but I’m not expecting that for years if not decades!
The coils are quite low down so your new stepper should fit easily enough. Can’t Joolz do this without a stepper, fkings things are st and pointless on these engines.
Not a oe steeper I reckon behind the engine they get less heat effected. That pic is before I used some cheap dividers so they are now neater.
If they do the job as they are meant to were talking 50,000 miles of use. Hiding them away seems like a good idea to me.
Obviously if one breaks down or whatever the Plenum has to come off but I’m not expecting that for years if not decades!
The coils are quite low down so your new stepper should fit easily enough. Can’t Joolz do this without a stepper, f
kings things are st and pointless on these engines. Classic Chim said:
Got any pics,, what power do they supply, im not falling even further behind 
Have you seen the Shakey video now it’s abandaned,,, glad we got to have fun there before it’s sad demise for houses.
Better treasure those memories,,, I’m not coming back until I can match your bloody power
Were you on cocaine that day,,, I know I was,,,, ,,,, damn fast starter you are
Coils produced in test 17bhp@5500rpm Have you seen the Shakey video now it’s abandaned,,, glad we got to have fun there before it’s sad demise for houses.
Better treasure those memories,,, I’m not coming back until I can match your bloody power
Were you on cocaine that day,,, I know I was,,,,
,,,, damn fast starter you are The video was a s
t reminder of what has happened to a great venue Am surprised you recognised it without the yellow b
d in front of you Classic Chim said:
jojackson4 said:
Coils produced in test 17bhp@5500rpm
The video was a st reminder of what has happened to a great venue
Am surprised you recognised it without the yellow bd in front of you
Right send me a link The video was a s
t reminder of what has happened to a great venue Am surprised you recognised it without the yellow b
d in front of you Yellow b
d,, in stitches Or Daz... did I actually win a race?
12.60 says I took it seriously once you’d f
ked off, causing a buffer zone so you were Can’t wait to see her again old bean, are you rebuilding the lump too. She’s gonna fly
ECU over the s
t wether moths Then riggers are to do at some point
Classic Chim said:
Its a long old haul but worth it in the end. I’m starting to think rigger replacent although I’d rather do a full body off once done will be ace and removes the last few question marks as an owner.
I might go for headlight covers as in MK3 if I go that far, faster
Riggers are getting done as a 6” lift as I haven’t got th 10k to blow on a full chassis job at the moment I might go for headlight covers as in MK3 if I go that far, faster
ChimpOnGas said:
The ones I found in the states were going to be £80 post and duty And the ones in Grease were not much better
All in I was close to £200
The ngk RR £130 all in
Gassing Station | Chimaera | Top of Page | What's New | My Stuff