Clutch smell second opinion ?

Clutch smell second opinion ?

Author
Discussion

TVRSJW

Original Poster:

216 posts

71 months

Thursday 22nd August 2019
quotequote all
Hey all it’s one of the posts where I suspect I know where it’s going but always worth asking for second opinions !

On the odd occasion when pulling into the odd show or car park where you may have to be on/off the clutch pedal a few times inching forwards I’ve caught the odd “whiff” of what smells like the clutch !

I’ve checked the fluid level (it’s full) and checked there and in footwell and under car and can’t see any leaking fluid

The clutch was changed around 20K ago which was only 2 years ago as this Chim got used and is currently on 120K (1996) the original was in for 100K !

So am I smelling the clutch plate ? It drives spot on and changes gear fine and can hard pull in any gear with no slip

TVRSJW

Original Poster:

216 posts

71 months

Friday 23rd August 2019
quotequote all
Christ you learn something new on this site everyday !

Yeah the clutch is heavy very heavy (have a new slave that came with car with the bigger bore that I was told would help with this it’s aTVR parts one ) and it takes some clutch control to pull off and at very low speed inching forward in traffic it can judder ! It’s on or off and does not like staying in the biting area


TVRSJW

Original Poster:

216 posts

71 months

Sunday 25th August 2019
quotequote all
Great advice thanks !! Interestingly I’ve done 200 miles in her today in the heat through towns villages lots of trying to park somewhere etc and have “not” smelt the possible ? Clutch smell ?

But it’s advice like this that puts you on the right path when the time comes to spend money on bigger ticket items and I too would be proper pissed off it spent that kind of money only to have it fail


TVRSJW

Original Poster:

216 posts

71 months

Wednesday 28th August 2019
quotequote all
While having my exhaust sorted today had a look into clutch inspection hole and firstly the clutch fingers looked ok and angled correctly , also there was a good 5-7mm of clearance on the hub to bearing which also felt smooth when handled , also the clutch arm is re-enforced with welded plate !

But around the hole on clutch fingers in a circle was orange dust ?

Any thoughts ? Clutch still works as it should no slipping but.....on a big hill into car park Monday stationary waiting for cars to park just biting the clutch several times caught a whiff of clutch smell again !

Someone I know had one of these 4.5 and he said his did it too and he had it for 4 years same clutch so was suggesting I don’t worry about it too much unless it starts to slip ?

TVRSJW

Original Poster:

216 posts

71 months

Monday 2nd September 2019
quotequote all
Went through paperwork and it had a clutch fitted my Mole valley last Sept and it was Q Kit500 so the uprated version same as TVR parts listing

So the odd occasion clutch type smell ?