Handbrake lever will not go vertical
Discussion
I need again your help.
I want to dismount the cover of the transmission tunnel (sorry, that I have maybe not the right English vocabulary).
Therefor I unlocked the handbrake cable from underneath.
Problem is that the handbrake lever will not go in the upright position.
It stops at about 60 degree. From underneath I can see, that the handbrake mechanism contacts the gear box at about 60 degree and so the lever can not be pulled any further.
Has anybody had such a problem?
Best regards from Germany
StefanK
I want to dismount the cover of the transmission tunnel (sorry, that I have maybe not the right English vocabulary).
Therefor I unlocked the handbrake cable from underneath.
Problem is that the handbrake lever will not go in the upright position.
It stops at about 60 degree. From underneath I can see, that the handbrake mechanism contacts the gear box at about 60 degree and so the lever can not be pulled any further.
Has anybody had such a problem?
Best regards from Germany
StefanK
Hi Mark,
you are right.
The console and the dash stuck(ed) together and I used a plastic spatula too to devide them.
But that's not the problem.
The problem is - in my case - that the hand brake lever will not go vertical and due to that I can not lift the console.
Best regards from Germany
StefanK
you are right.
The console and the dash stuck(ed) together and I used a plastic spatula too to devide them.
But that's not the problem.
The problem is - in my case - that the hand brake lever will not go vertical and due to that I can not lift the console.
Best regards from Germany
StefanK
Gassing Station | Griffith | Top of Page | What's New | My Stuff