Discussion
Blower has packed up suddenly.
Power at point where the blower wires go into the inner wing, so looks like a faulty motor or connection?
The question is.. how do you access the blower?
I can see a fibre glass panel with 2 black self tappers. I took out the screws but they don’t hold the panel on as I thought ( I guess it’s holding the blower to the panel?)
Does that panel come off with a bit of persuasion to lift out the motor, or am I in the wrong place?!
Cheers
Power at point where the blower wires go into the inner wing, so looks like a faulty motor or connection?
The question is.. how do you access the blower?
I can see a fibre glass panel with 2 black self tappers. I took out the screws but they don’t hold the panel on as I thought ( I guess it’s holding the blower to the panel?)
Does that panel come off with a bit of persuasion to lift out the motor, or am I in the wrong place?!
Cheers
stevesprint said:
interesting, did you find the location of your blower?
Well done, you fixed it.
No. I thought it would be behind the “panel “ that the heater wires go through but I don’t think it is a panel?Well done, you fixed it.
Took out the 2 black self tappers and tried to remove it but it looks like it is a continuation of the floor??
Thankfully realised the wires weren’t attached so stopped there.
Mines a bit of a Frankenstein- pre cat been repaired with a 500 front so it could be anywhere?!!
Gassing Station | Griffith | Top of Page | What's New | My Stuff