2014 RR bonnet alignment

[lingfengjiang]

I just bot a used 2014 reg range rover vouge se from a 4x4 specialist. Everything of the car is fine except the bonnet alignment. When i close the bonnet, there is a significant gap between the bonnet and the lamp & side panel on the driver side comparing with the passenger side.

The dealer told me to twist the rudder pins located under the hood each side, i tried to fasten the driver side and loosen the other one but no good result, gap is still there, it seems solid and physical.

What else can i try? anyone experiencing the same problem before please help.

Thanks J

[lingfengjiang]

btw the hpi fully clear, just one owner from new no damage history.

[lingfengjiang]

Driver side




Pax side

[lingfengjiang]

not too much but definitely bigger gap than pax side, is this engine bonnet adjustable?

[lingfengjiang]

problem solved, it is not the problem of the driver side, it is the passenger side where the hinge area is too stiff, after lifting up a bit, the two sides looks level now.