Leccy Question

Author
Discussion

GreenLandy

Original Poster:

1,635 posts

232 months

Thursday 17th January 2008
quotequote all
Ok got home from work last night to find Landy all alone with with just the headlights on..... On inspection all switches are in the off position....Brain sweats for a bit and after removing the fuses remamber that this can be caused by the dim/dip relay I fit the spare one I have kicking around and hey presto lights back to normal thumbup

Tonight TOH is crossing a main A road when kaput all lights dead frown. Luckily the lights worked for her if she held them on flash and she was only 2 minutes from home.
New dim/dip on order but what could cause this? Unit fitted had been kicking around my garage for a couple of years...........

GreenLandy

Original Poster:

1,635 posts

232 months

Saturday 19th January 2008
quotequote all
Fitted the new unit and I still don't have head lights frown all fuses bulbs ect are fine. The unit works as when the side lights are on the headlights dim a little bit.
How do I bypass the dim dip relay?

GreenLandy

Original Poster:

1,635 posts

232 months

Saturday 19th January 2008
quotequote all
Steve_D said:
That unit looks the same is mine from 1987 RR Classic.
Mine went wrong so you simply unplug it. There is no bypass requirement.

Pin 3 is constant 12v input.
Pin 5 is feed from side lights so it knows you have side lights on.
Pin 1 is oil pressure switch so it knows the engine is running.
Pin 4 is high beam. If you are on high beam it switches out the dim/dip.
Pin 2 is the output to the dip beams. This will be half power giving the 'Dim'.

As none of your lights pass through it you can see that it can simply be unplugged.

Steve
Thanks for that I've narrowed it down to a faulty switch hopefully this will cure it rolleyes

GreenLandy

Original Poster:

1,635 posts

232 months

Friday 25th January 2008
quotequote all
Nnew switch fitted Lights still don't work frown. HELP

GreenLandy

Original Poster:

1,635 posts

232 months

Friday 25th January 2008
quotequote all
Stupid thought but is there a relay for the headlights? If so what's it look like and where will it be found?

GreenLandy

Original Poster:

1,635 posts

232 months

Saturday 26th January 2008
quotequote all
Steve_D said:
Back to basics,
Do you have side lights?
Any headlights?
Headlight flash?
With the light switch on and dip selected, can you switch on the rear fog?
Are the fuses sound? There may be 4 fuses one for each headlight function.

Steve
yes side lights and dimmed head as per dim/dip relay.
Yes head light flash.
yes fog
yes good fuses


I'm stumped frown

GreenLandy

Original Poster:

1,635 posts

232 months

Monday 28th January 2008
quotequote all
Headlight stalk replaced and flash stalk was replaced 4 months ago frown

GreenLandy

Original Poster:

1,635 posts

232 months

Monday 28th January 2008
quotequote all
It's got to be the relay. Will go out looking for volts later on this week once work slows down.
Cheers Matt

GreenLandy

Original Poster:

1,635 posts

232 months

Sunday 3rd February 2008
quotequote all
Duff relay biggrin. Happy days.