PC to X Box 360
Discussion
Ok, heres the thing. I have a pc in spare room, and xbox in living room where flat screen is.
I have run x metres of UTP CAT5e cable round the outside of house potentially connecting the two. But now I guess I need a hub. I did the cable months ago, but just never got round to connecting it all up. And I want to give the online gaming thing a go now.
What type of hub should I be going for, and how do I do it?
Thanks for any help.
Cad
I have run x metres of UTP CAT5e cable round the outside of house potentially connecting the two. But now I guess I need a hub. I did the cable months ago, but just never got round to connecting it all up. And I want to give the online gaming thing a go now.
What type of hub should I be going for, and how do I do it?
Thanks for any help.
Cad
ThePassenger said:
Are you sure its a router and not a modem? A router should just be 'poof' and the 360 picks up an IP/DNS setup from the router, where as a modem might get a bit arsey with the MAC address changing.
Never having seen a 360's innards poke around in it's network settings and make sure everything is set to 'DHCP' or 'Network Assigned' as far as IP Address, Subnet and DNS is concerned.
Never having seen a 360's innards poke around in it's network settings and make sure everything is set to 'DHCP' or 'Network Assigned' as far as IP Address, Subnet and DNS is concerned.
Sorry. I meant modem
I thnk its a hub or router that I need. So the pc does'nt have to be switched on whenever I want to play 'XBox Live'.
thepassenger said:
Question: Do you have NTL cable internet or their ADSL offering via Freeserve/Orange?
Its broadband cable. Y'know, the b/b internet, digi TV and phone package.Its connected by USB. The only port left on the back is an rj45 opening.
The small box on the wall behind the PC has a fibre optic cable going to the modem.
I'm pretty sure its fibre anyway.
Thanks for your responses so far. Much obliged.
Cad
viper_larry said:
I have a similar setup to you. NTL cable modem goes into my Linksys WRT54G Wireless router providing wireless networking around the house and a 4 port switch. One of these has a cable that runs around the house to the living room. Xbox 360 / Mac Mini plugged into it.
So for all intents and purposes, I just buy any wired router (cable already routed to tv) and buy a short cable with rj45s on each end. Plug one end in cable modem, and the other into router. Is that it?
Will the router sort itself out using DHCP tp get an IP address? Or do I have to go start configuring it?
viper_larry said:
caduceus said:
viper_larry said:
I have a similar setup to you. NTL cable modem goes into my Linksys WRT54G Wireless router providing wireless networking around the house and a 4 port switch. One of these has a cable that runs around the house to the living room. Xbox 360 / Mac Mini plugged into it.
So for all intents and purposes, I just buy any wired router (cable already routed to tv) and buy a short cable with rj45s on each end. Plug one end in cable modem, and the other into router. Is that it?
Will the router sort itself out using DHCP tp get an IP address? Or do I have to go start configuring it?
That's about it yes. The Router will use DHCP to assign IP addresses to the equipment attached to it. You might as well get a Wireless Router such as the WRT54G - you can disable the wireless capabilities through the router interface, but at least you'll have this capability if ever you need it?
It really is plug and play with NTL...
Thats great Larry, thanks.
Think I'll just get a normal wired router seeing as the cable is in place already. Not mad about wireless, due to security integrity.
Thanks again all for your input
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff