964 engine upgrades, who is the go to?

[Cheib]

Love reading threads like this....just wish I could contribute ! So much knowledge on PH.

[IMI A]

Slippydiff said:

IMI A said:

H, you really need to get out more !

Evening I, I hope you’re well ?
Never forget, PH, pedantry matters

A star geekery. I wonder which my one has now that you mention it

[Slippydiff]

IMI A said:

Slippydiff said:

IMI A said:

H, you really need to get out more !

Evening I, I hope you’re well ?
Never forget, PH, pedantry matters

A star geekery. I wonder which my one has now that you mention it

I think sir will find his engine is fitted with the 964 upgraded parts, that being the two part, dowelled vernier gears featuring keyways and woodruff keys for added security

[IMI A]

Cheers I thought so. Have you found anything for yourself post GT3 or keeping powder dry?

[Slippydiff]

IMI A said:

Cheers I thought so. Have you found anything for yourself post GT3 or keeping powder dry?

Plans are afoot, but the market’s not worth rushing into currently imvho.

[IMI A]

Interesting market and lots of nice stuff I've seen come on the market. It will only get better if you're a buyer.

[Slippydiff]

IMI A said:

Interesting market and lots of nice stuff I've seen come on the market. It will only get better if you're a buyer.

[Steve Rance]

Id be putting money into the chassis before the engine on an aircooled. You will get a better performance return for your £. On saying that, a well tuned airooled engine is a truly wonderous thing

[C2Red]

Steve Rance said:

Id be putting money into the chassis before the engine on an aircooled. You will get a better performance return for your £. On saying that, a well tuned airooled engine is a truly wonderous thing

Thanks Steve,

I have Bilstein with H&R, LSD, Strut Brace, RS drop links and ARB's, Powerflex and Chris Walrod bushings, strengthend engine carrier RS engine mounts; anything else you'd suggest? I was thinking of bining the Bilsteins for Ohlins or KWv3, but again its only if the potential sales falls through.

Thanks

[Slippydiff]

C2Red said:

Thanks Steve,

I have Bilstein with H&R, LSD, Strut Brace, RS drop links and ARB's, Powerflex and Chris Walrod bushings, strengthend engine carrier RS engine mounts; anything else you'd suggest? I was thinking of bining the Bilsteins for Ohlins or KWv3, but again its only if the potential sales falls through.

Thanks

I'd say that's a very nicely road optimised (with occasional track use) chassis.

Dampers ? The law of diminishing returns definitely applies, you really do get what you pay for. The Bilsteins/HR springs/RS ARB's combination is highly regarded, and a very good compromise that blends comfort on the road with improved performance.
So with that sorted, let's get back to spending your hard-earned on the properly oily bits

[Steve Rance]

C2Red said:

Thanks Steve,

I have Bilstein with H&R, LSD, Strut Brace, RS drop links and ARB's, Powerflex and Chris Walrod bushings, strengthend engine carrier RS engine mounts; anything else you'd suggest? I was thinking of bining the Bilsteins for Ohlins or KWv3, but again its only if the potential sales falls through.

Thanks

Thats a nice set of modifications. For biggest return for £ I'd reccomend a set of Tarret spring plates. They will really tighten up the rear of the car. Then i'd fit a set of big red cailipers/discs to the front - but you may have already done that? If not, i'd definately do that. It will push the brake bias a little forward if you dont do anything else to the brake mod. That really suited my driving style but it may not yours. Its a straightforward mod. RS light weight flywheel is a very nice mod. I really frees up the engine and makes it a lot more responsive - but you will need the mapping changed or you will stall regularly. The RS gear linkage kit is also a very nice upgrade or the Rothsport kit but not a massive must. Dampers could be improved but as Slippy says, thats a minefield. If your spring/damper set up feels nice, i'd leave it. I went KW clubsport. They are a reasonable damper and come with adjustable top mounts. The valving set up is vey good. Overall they are a better specced and value for money damper that the V3 but the spring rates are quite high. Again that suits me but its subjective. If i had the budget, id fit a high end damper but the benefits would be marginal.

According to Wayne scholfield's dyno (it was Colin's but not sure who's he uses now) he managed to extract 300bhp from my standard engine with a remap(with the usual exhaust mods). That was done in Nov when the weather adds a bit. Most of the time it would be 290bhp i think. It does feel a little stronger and but its no way near what a well modded engine will give you - that is not a cheap excercise. All of the above would probably cost you less than a quarter of the cost of a big engine mod.

On saying all of that - my real advice is DONT SELL THE CAR!

Good luck

[C2Red]

Slippydiff said:

C2Red said:

Thanks Steve,

I have Bilstein with H&R, LSD, Strut Brace, RS drop links and ARB's, Powerflex and Chris Walrod bushings, strengthend engine carrier RS engine mounts; anything else you'd suggest? I was thinking of bining the Bilsteins for Ohlins or KWv3, but again its only if the potential sales falls through.

Thanks

I'd say that's a very nicely road optimised (with occasional track use) chassis.

Dampers ? The law of diminishing returns definitely applies, you really do get what you pay for. The Bilsteins/HR springs/RS ARB's combination is highly regarded, and a very good compromise that blends comfort on the road with improved performance.
So with that sorted, let's get back to spending your hard-earned on the properly oily bits

Thank you. :-)

[Slippydiff]

Steve Rance said:

On saying all of that - my real advice is DONT SELL THE CAR!

This ^ is without a shadow of doubt, THE best bit of advice proffered on this thread so far

[C2Red]

Steve Rance said:

C2Red said:

Thanks Steve,

I have Bilstein with H&R, LSD, Strut Brace, RS drop links and ARB's, Powerflex and Chris Walrod bushings, strengthend engine carrier RS engine mounts; anything else you'd suggest? I was thinking of bining the Bilsteins for Ohlins or KWv3, but again its only if the potential sales falls through.

Thanks

Thats a nice set of modifications. For biggest return for £ I'd reccomend a set of Tarret spring plates. They will really tighten up the rear of the car. Then i'd fit a set of big red cailipers/discs to the front - but you may have already done that? If not, i'd definately do that. It will push the brake bias a little forward if you dont do anything else to the brake mod. That really suited my driving style but it may not yours. Its a straightforward mod. RS light weight flywheel is a very nice mod. I really frees up the engine and makes it a lot more responsive - but you will need the mapping changed or you will stall regularly. The RS gear linkage kit is also a very nice upgrade or the Rothsport kit but not a massive must. Dampers could be improved but as Slippy says, thats a minefield. If your spring/damper set up feels nice, i'd leave it. I went KW clubsport. They are a reasonable damper and come with adjustable top mounts. The valving set up is vey good. Overall they are a better specced and value for money damper that the V3 but the spring rates are quite high. Again that suits me but its subjective. If i had the budget, id fit a high end damper but the benefits would be marginal.

According to Wayne scholfield's dyno (it was Colin's but not sure who's he uses now) he managed to extract 300bhp from my standard engine with a remap(with the usual exhaust mods). That was done in Nov when the weather adds a bit. Most of the time it would be 290bhp i think. It does feel a little stronger and but its no way near what a well modded engine will give you - that is not a cheap excercise. All of the above would probably cost you less than a quarter of the cost of a big engine mod.

On saying all of that - my real advice is DONT SELL THE CAR!

Good luck

Thank you, I've followed your's for a while... V nice, and I'm really in two minds about what to do, emotional investment, versus finanical, versus heart saying lifes short, get something that is a touch different.. hence looking at the plan B route. At least if I dont sell, i know the foibles of the car, and thats a big thing.

Edited by C2Red on Tuesday 3rd November 12:41

Edited by C2Red on Tuesday 3rd November 12:44

[marine boy]

Steve Rance said:

On saying all of that - my real advice is DONT SELL THE CAR!

Just re-posted this as it's excellent advice

Not quite on topic but you could take a slightly different approach to making your 964 special by removing great chunks of weight from it

As it's now a desirable Porsche you may want to limit yourself to bolt on reverse able weight removal such as seats, bonnet, engine lid, wheels, battery, rear seat delete etc

I've removed over 200kgs from of my C2, only lightweight parts added are a CAT delete and lighter wheels, certainly a bit stripped out for most tastes but great fun to drive on my own. Less weight has brought the car alive, especially the weight saved on the wheels

I should easily get down to 250kgs removed with a few more bolt on lightweight parts. The last 100kgs or more after that I'll have to get serious and start a full nut and bolt rebuild it up from the bare shell

[Steve Rance]

Really Interesting post. That really is a chunk of weight to save and would make a real difference to the driving experience. I’d be keen to know how you got there in some detail.

[C2Red]

marine boy said:

Steve Rance said:

On saying all of that - my real advice is DONT SELL THE CAR!

Just re-posted this as it's excellent advice

Not quite on topic but you could take a slightly different approach to making your 964 special by removing great chunks of weight from it

As it's now a desirable Porsche you may want to limit yourself to bolt on reverse able weight removal such as seats, bonnet, engine lid, wheels, battery, rear seat delete etc

I've removed over 200kgs from of my C2, only lightweight parts added are a CAT delete and lighter wheels, certainly a bit stripped out for most tastes but great fun to drive on my own. Less weight has brought the car alive, especially the weight saved on the wheels

I should easily get down to 250kgs removed with a few more bolt on lightweight parts. The last 100kgs or more after that I'll have to get serious and start a full nut and bolt rebuild it up from the bare shell

Thank you, been there, did some of that; went for southbound RS carpets, rear seat removal, 100cell cat, RS door cards, and more. But, i'm kind of over the hardcore that it bought, and went down the kind of GT route with the bodywork and interior.
The engine remains the aspect I'm most interested in, and getting additional power to suit my mindset.

Thanks

[Steve Rance]

Can’t criticise you for that logic. I’d be very interested in what spec you end up deciding to build your engine.

[GTSJOE]

Phil Hindley at Tech9 has a very good reputation, especially with 964 engines. The previous owner of my car had a rebuild by Phil, such a sweet engine, 300bhp, very tractable, loads of torque.

[C2Red]

GTSJOE said:

Phil Hindley at Tech9 has a very good reputation, especially with 964 engines. The previous owner of my car had a rebuild by Phil, such a sweet engine, 300bhp, very tractable, loads of torque.

Thank you.

I'm still in two minds, but 18 years is a damned good run. If I dont sell, I'll look at Tech9 as well as the others mentioned here.

I have a winter to look forward to....

Thanks