Torque settings
Archive #15383878
Torque Settings lb/ft
Please Update by copying the following line, pasting at the bottom of the list, and substituting the correct values...
(*1) Thread tightening direction is in the direction of Wheel Rotation
Please Update by copying the following line, pasting at the bottom of the list, and substituting the correct values...
Description | nn |
====================
Upper Wishbones | ? |
Lower Wishbones | 55 |
Brake Calipers to carrier | 40-45 |
Caliper mount to hub carrier | 40-45 |
Brake line banjo bolt | 9-10 + 90 degrees |
Drag Link bars | ? |
Front Anti Roll bar | ? |
Rear Anti roll bar | ? |
Shock Absorbers | 45-50 |
Lower Diff Bushes | 90 |
Upper ball joint plate to hub carrier | 20-25 |
Upper ball joint to plate | 50-55 |
Lower ball joint to steering arm | 60-70 |
Steering arm to hub carrier | 45-50 |
Track rod end taper nut | 35-40 |
Front hub centre bolt | 70-75 |
Hub to hub carrier | 45-50 + loctite |
Rear Driveshaft/Hub 41mm nut (*1) | ? |
Bellhousing to engine | 50 |
Gearbox to bellhousing | 50 |
Clutch cover to flywheel | 25 |
Slave cylinder to bellhousing | 15 |
Lambda sensors | finger tight + 180 degrees |
Diff front bracket to chassis | 95 |
(*1) Thread tightening direction is in the direction of Wheel Rotation