Torque Settings lb/ft

Please Update by copying the following line, pasting at the bottom of the list, and substituting the correct values...

Description

nn

====================

Description	lb/ft
Wishbones Upper	?
Wishbones Lower	55
Brake Calipers to carrier	40-45
Caliper mount to hub carrier	40-45
Brake line banjo bolt	9-10 + 90 degrees
Drag Link bars	?
Front Anti Roll bar	?
Rear Anti roll bar	?
Shock Absorbers	45-50
Upper ball joint plate to hub carrier	20-25
Upper ball joint to plate	50-55
Lower ball joint taper nut	60-70
Lower ball joint to suspension	20-25
Steering arm to hub carrier	45-50
Calliper mount to hub carrier	40-45
Calliper to calliper mount	40-45
Through hub bolt	70-75
Track rod end taper nut	35-40
Front hub centre bolt	70-75
Hub to hub carrier	45-50 + loctite
Wheel nut	55-60
Rear Driveshaft/Hub 41mm nut (*1)	?
Bellhousing to engine	50
Gearbox to bellhousing	50
Clutch cover to flywheel	25
Slave cylinder to bellhousing	15
Lambda sensors	finger tight + 180 degrees
Diff front bracket to chassis	95

(*1) Thread tightening direction is in the direction of Wheel Rotation