Torque Settings lb/ft

Please Update by copying the following line, pasting at the bottom of the list, and substituting the correct values...

Description

nn

====================

Description	lb/ft
Anti Roll bar Rear	?
Anti Roll bar Front	?
Bellhousing to Gearbox	50
Bellhousing to engine	50
Brakes: Caliper mount to hub carrier	40-45
Brakes: Caliper to Caliper mount	40-45
Brakes: Caliper to carrier	40-45
Brakes: line banjo bolt	9-10 + 90 degrees
Clutch cover to flywheel	25
Diff front bracket to chassis	95
Drag link to chassis	40-45
Drag Link to suspension arm	45-50
Front hub centre bolt	70-75
Hub to hub carrier	45-50 + loctite
Lambda sensors	finger tight + 180 degrees
Lower ball joint taper nut	60-70
Lower ball joint to suspension	20-25
Rear Hub - Driveshaft/Hub 41mm nut (*1)	220
Shock Absorbers	45-50
Slave cylinder to bellhousing	15
Steering arm to hub carrier	45-50
Track rod end taper nut	35-40
Upper ball joint plate to hub carrier	20-25
Upper ball joint to plate	50-55
Wheel nut	55-60
Wishbones Lower	55
Wishbones Upper	40-45

(*1) Thread tightening direction is in the direction of Wheel Rotation