991.1 Steering Wheel Upgrade

991.1 Steering Wheel Upgrade

Author
Discussion

le_gazman

Original Poster:

949 posts

235 months

Monday 24th February 2020
quotequote all
Anyone swapped the 991.1 multifunction wheel for a Macan/718/991.2 wheel? Been meaning to do it for a while now and wanted to know if anyone else had done it or could recommend a specialist who could. I was thinking about doing it myself.

I see there’s a kit available to allow full multifunction capability, so know I need to buy that to get the 991.2 wheel working.

Any wheels I’ve seen for sale online seem to be sans airbag so presumably need to source that separately.

Pau1

315 posts

213 months

Monday 24th February 2020
quotequote all
le_gazman said:
Anyone swapped the 991.1 multifunction wheel for a Macan/718/991.2 wheel? Been meaning to do it for a while now and wanted to know if anyone else had done it or could recommend a specialist who could. I was thinking about doing it myself.

I see there’s a kit available to allow full multifunction capability, so know I need to buy that to get the 991.2 wheel working.

Any wheels I’ve seen for sale online seem to be sans airbag so presumably need to source that separately.
Yes, I used one of those GPS modules and a Macan wheel in my 991. I hated the Multifunction buttons for the PDK on the original wheel. The later wheel transformed the drive for me, it also looks so much better, well worth the effort imho.

240Cup

660 posts

198 months

Monday 24th February 2020
quotequote all
Is it even simpler in the manual car?

Pau1

315 posts

213 months

Monday 24th February 2020
quotequote all
240Cup said:
Is it even simpler in the manual car?
The GPS module is needed for the Multifunction to work, not the paddles really so it depends on your original wheel in the manual car.

240Cup

660 posts

198 months

Monday 24th February 2020
quotequote all
This is my new car - horrid wheel in the pictures ..


https://finder.porsche.com/gb/en_GB/911-Carrera-S-...


Pau1

315 posts

213 months

Monday 24th February 2020
quotequote all
Old and new.


240Cup

660 posts

198 months

Monday 24th February 2020
quotequote all
Lovely - amazing difference..!!

what was the £££. I guess I will have to get OPC to do it as my car now under 2 yr OPC warranty.

le_gazman

Original Poster:

949 posts

235 months

Monday 24th February 2020
quotequote all
Pau1 said:
Yes, I used one of those GPS modules and a Macan wheel in my 991. I hated the Multifunction buttons for the PDK on the original wheel. The later wheel transformed the drive for me, it also looks so much better, well worth the effort imho.
Thanks for this. Would you be able to share some info about the job and pricing, even in PM form if you’d rather not say publicly? I’ve got 2 and a bit years worth of Porsche warranty still to run on my car.

So

27,741 posts

230 months

Monday 24th February 2020
quotequote all
Pau1 said:
Old and new.

I prefer the old.

I realise that I was the only Porsche customer ever to like the buttons. But I liked the buttons.

I have paddles on two of my cars now and I don't recall the last time that I used them.


le_gazman

Original Poster:

949 posts

235 months

Monday 24th February 2020
quotequote all
So said:
I prefer the old.

I realise that I was the only Porsche customer ever to like the buttons. But I liked the buttons.

I have paddles on two of my cars now and I don't recall the last time that I used them.
I’m not doing it for the paddles, although I do hate the buttons. I just think the 991.2 wheel is light years ahead of the 991.1 wheel in the looks department.

Pau1

315 posts

213 months

Tuesday 25th February 2020
quotequote all
le_gazman said:
Thanks for this. Would you be able to share some info about the job and pricing, even in PM form if you’d rather not say publicly? I’ve got 2 and a bit years worth of Porsche warranty still to run on my car.
It's a pretty straight forward job, not too technical at all. The install instructions are sent once you buy a module from gpsadapter.us. Cost wise I was around £1000 for the wheel, airbag and module. Fitting takes about an hour.
FYI, the module is only there to intercept the CAN signal for the multifunction buttons, the OEM airbag and paddle wiring is not touched.

240Cup

660 posts

198 months

Tuesday 25th February 2020
quotequote all
very helpful - thank you.

Gonna get a quote today from OPC for doing mine - will revert ...!!

240Cup

660 posts

198 months

Tuesday 25th February 2020
quotequote all
£1,500....!!

r1flyguy1

1,570 posts

184 months

Tuesday 25th February 2020
quotequote all
240Cup said:
£1,500....!!
It’s light years ahead apparently so must be worth it biglaugh

le_gazman

Original Poster:

949 posts

235 months

Tuesday 25th February 2020
quotequote all
Pau1 said:
It's a pretty straight forward job, not too technical at all. The install instructions are sent once you buy a module from gpsadapter.us. Cost wise I was around £1000 for the wheel, airbag and module. Fitting takes about an hour.
FYI, the module is only there to intercept the CAN signal for the multifunction buttons, the OEM airbag and paddle wiring is not touched.
That’s about what I was expecting, thanks - did you source the wheel and airbag from an OPC?

7 CUU

916 posts

202 months

Sunday 24th July 2022
quotequote all
Just pinging this thread to see if anyone has had this done recently? Any indies out there that do the conversion?

Had anyone had a OPC do the work?
Thanks

P40L VX

132 posts

223 months

Sunday 20th August 2023
quotequote all
Using this thread to see if any people that have upgraded from a .1 to a .2 wheel, or 991.2 owners. I completed the upgrade to a .2 wheel yesterday (none MF) was a quick and easy 15 minute job. The only thing I’ve noticed on the .2 airbag is, the airbag slightly wobbles when secured in the wheel. Is that normal on a .2 car?



Edited by P40L VX on Sunday 20th August 12:22

GTRene

17,808 posts

232 months

Sunday 20th August 2023
quotequote all
Pau1 said:
Old and new.

new one way better.

but now the ugly (sorry) auto gearshift... can such be changed for this model?



or maybe even better just buttons? yes I like the latest stick which looks like a normal manual shifter, but thats also frustrating because it is not biggrin

rrroro

409 posts

163 months

Monday 21st August 2023
quotequote all
P40L VX said:
Using this thread to see if any people that have upgraded from a .1 to a .2 wheel, or 991.2 owners. I completed the upgrade to a .2 wheel yesterday (none MF) was a quick and easy 15 minute job. The only thing I’ve noticed on the .2 airbag is, the airbag slightly wobbles when secured in the wheel. Is that normal on a .2 car?



Edited by P40L VX on Sunday 20th August 12:22
Sounds like the plate behind the aibag might be loose. Remove the airbag and tighten the torx screws and you should be ok. (This is how the .1 wheel works, I’m guessing it’s the same for .2)

FrancisA

97 posts

17 months

Thursday 9th May
quotequote all
Pau1 said:
It's a pretty straight forward job, not too technical at all. The install instructions are sent once you buy a module from gpsadapter.us. Cost wise I was around £1000 for the wheel, airbag and module. Fitting takes about an hour.
FYI, the module is only there to intercept the CAN signal for the multifunction buttons, the OEM airbag and paddle wiring is not touched.
Hey Paul
Resurrecting an old thread but I bought a 991 a few months ago. Where did you source the wheel from and did you do the install yourself.?