F918 PRK Another S Resto Thread

[v8s4me]

Good luck with the rebuild. The chassis doesn't look bad at all. If those are the only problems then it should be a relatively straight forward repair. Have you checked the trailing arms? They rot out from the inside so well worth a look.
Ready for Easter then?

BTW - IMHO the best "wide open bonnet" solution is the one Phillpot came up with. You should be able to find details on here.

Edited by v8s4me on Saturday 23 December 20:29

[magpies]

The 2.9 is a basic but good engine, a rebuilt one (maybe a camshaft swap rally/fast road/stage2) gives more than adequate power unless you are using for track/competition use.

[v8s4me]

Hi Mick - did you see my reply to you on FB about Laon?

[abercoms]

I guess 9 months since last post is not bad going on some resto's but chassis back from blasters, I also got them to do the welding repairs and coat it in 4 layers of 'stuff' similar to what they use for the North Sea. Its currently tuckd into store till I rejigger the main garage to make room for it so I expect it will probably be a while longer for a next progress post.