What's happening in your garage this weekend ?
Discussion
Ah yep should have said, windex for the outside, special anti fog treatment for the inside!
The ventilation indeed remains a mystery to me. Mostly mitigated by the fact that you can drive with the top down even in the coldest weather and still feel snug because the seats are so low. Have also thrown in some dehumidifiers which seem to be helping.
The ventilation indeed remains a mystery to me. Mostly mitigated by the fact that you can drive with the top down even in the coldest weather and still feel snug because the seats are so low. Have also thrown in some dehumidifiers which seem to be helping.
Guys,
Always work putting a few of these in you car £8 each.
Unibond 360.
https://www.amazon.co.uk/AERO-Ultra-Absorbent-Dehu...
They really make a difference this time of year, even in the garage.
Always work putting a few of these in you car £8 each.
Unibond 360.
https://www.amazon.co.uk/AERO-Ultra-Absorbent-Dehu...
They really make a difference this time of year, even in the garage.
Outriggers completed. Painted. Body all aligned and bolted up with new stainless bolts.
Fuel tank refurbished, new cross tank hose fitted as well as tank to fuel pump hose.
Next job is to check the cam.. I think the cam profile has worn so need to pop the rocker covers off to check.
Got a new cam, solid lifters and vernier sprocket just in case.. 99% sure it is. New cam should make mot emissions easier. New cam is an M238.
Fuel tank refurbished, new cross tank hose fitted as well as tank to fuel pump hose.
Next job is to check the cam.. I think the cam profile has worn so need to pop the rocker covers off to check.
Got a new cam, solid lifters and vernier sprocket just in case.. 99% sure it is. New cam should make mot emissions easier. New cam is an M238.
Edited by rev-erend on Wednesday 23 December 15:27
rev-erend said:
Outriggers completed. Painted. Body all aligned and bolted up with new stainless bolts.
Fuel tank refurbished, new cross tank hose fitted as well as tank to fuel pump hose.
Next job is to check the cam.. I think the cam profile has worn so need to pop the rocker covers off to check.
Got a new cam, solid lifters and vernier sprocket just in case.. 99% sure it is. New cam should make mot emissions easier. New cam is an M238.
Just changed the cam as part of engine rebuild - make sure it doesn't require machining if there's retaining plate involved...Fuel tank refurbished, new cross tank hose fitted as well as tank to fuel pump hose.
Next job is to check the cam.. I think the cam profile has worn so need to pop the rocker covers off to check.
Got a new cam, solid lifters and vernier sprocket just in case.. 99% sure it is. New cam should make mot emissions easier. New cam is an M238.
Edited by rev-erend on Wednesday 23 December 15:27
Outriggers are now finished, so just started on the cam replacement.
Oil and water drained down, just starting strip down and check of components.
Sure was cold in the garage this weekend, even with a little heater.
Oil and water drained down, just starting strip down and check of components.
Sure was cold in the garage this weekend, even with a little heater.
Edited by rev-erend on Monday 11th January 09:37
Edited by rev-erend on Monday 11th January 09:38
rev-erend said:
Outriggers are now finished, so just started on the cam replacement.
Oil and water drained down, just starting strip down and check of components.
Sure was cold in the garage this weekend, even with a little heater.
Mmm. Rocker envy........Oil and water drained down, just starting strip down and check of components.
Sure was cold in the garage this weekend, even with a little heater.
Edited by rev-erend on Monday 11th January 09:37
Edited by rev-erend on Monday 11th January 09:38
KKson said:
rev-erend said:
Outriggers are now finished, so just started on the cam replacement.
Oil and water drained down, just starting strip down and check of components.
Sure was cold in the garage this weekend, even with a little heater.
Mmm. Rocker envy........Oil and water drained down, just starting strip down and check of components.
Sure was cold in the garage this weekend, even with a little heater.
Edited by rev-erend on Monday 11th January 09:37
Edited by rev-erend on Monday 11th January 09:38
Gassing Station | Wedges | Top of Page | What's New | My Stuff