This place is like heaven on earth

This place is like heaven on earth

Author
Discussion

Polly Grigora

Original Poster:

11,209 posts

117 months

Monday 15th August 2022
quotequote all
They look like Junior Power Timer Terminals

https://www.te.com/usa-en/product-2-929937-1.html



They are over @ https://www.automotiveconnectors.com/search/for/Ju...


Edited by Polly Grigora on Monday 15th August 16:13

bobfather

11,187 posts

263 months

Monday 15th August 2022
quotequote all
Polly Grigora said:
They look like Junior Power Timer Terminals


Unfortunately no all of those need larger channels for installation. The plug is from the VAG car range. I found some on Amazon but the minimum purchase is twenty units for £20. I need one rolleyes

Polly Grigora

Original Poster:

11,209 posts

117 months

Monday 15th August 2022
quotequote all
Mmmm, fooled me, they looked big in the image

Radio mini ISO Plug terminals?




https://www.tme.com/us/en-us/details/zrs-iso-3_n/i...

https://www.conrad.com/p/aiv-blau-mini-iso-connect...

Edited by Polly Grigora on Monday 15th August 17:53

S6PNJ

5,357 posts

289 months

Monday 15th August 2022
quotequote all
A question Polly - without the correct (or any) tool, how are those pins removed from the plastic housing (radio amp plug)? What can I 'Heath Robinson' together to get the pins out?

bobfather

11,187 posts

263 months

Monday 15th August 2022
quotequote all
Cheers, that's them biggrin:

Polly Grigora

Original Poster:

11,209 posts

117 months

Monday 15th August 2022
quotequote all
S6PNJ said:
A question Polly - without the correct (or any) tool, how are those pins removed from the plastic housing (radio amp plug)? What can I 'Heath Robinson' together to get the pins out?
Remove the hard steel from a wiper blade rubber, grind it to a narrow width and grind it thinner, work to a length of approx 4 Cms, cut the ground part off after grinding and knock it into a small wooden handle or whatever takes your fancy

The steel is very strong and great for putting down plug slots for pushing in terminal locking tabs

Polly Grigora

Original Poster:

11,209 posts

117 months

Monday 15th August 2022
quotequote all
bobfather said:
Cheers, that's them biggrin:
Very good then, something's telling me that they were in Amp terminal kits for BMW

S6PNJ

5,357 posts

289 months

Monday 15th August 2022
quotequote all
Polly Grigora said:
S6PNJ said:
A question Polly - without the correct (or any) tool, how are those pins removed from the plastic housing (radio amp plug)? What can I 'Heath Robinson' together to get the pins out?
Remove the hard steel from a wiper blade rubber, grind it to a narrow width and grind it thinner, work to a length of approx 4 Cms, cut the ground part off after grinding and knock it into a small wooden handle or whatever takes your fancy

The steel is very strong and great for putting down plug slots for pushing in terminal locking tabs
Fab! Many thanks - as luck (or pre-planning) would have it, I have 2 wiper blade inserts already! And plenty to grind them with.

Polly Grigora

Original Poster:

11,209 posts

117 months

Monday 15th August 2022
quotequote all
S6PNJ said:
Polly Grigora said:
S6PNJ said:
A question Polly - without the correct (or any) tool, how are those pins removed from the plastic housing (radio amp plug)? What can I 'Heath Robinson' together to get the pins out?
Remove the hard steel from a wiper blade rubber, grind it to a narrow width and grind it thinner, work to a length of approx 4 Cms, cut the ground part off after grinding and knock it into a small wooden handle or whatever takes your fancy

The steel is very strong and great for putting down plug slots for pushing in terminal locking tabs
Fab! Many thanks - as luck (or pre-planning) would have it, I have 2 wiper blade inserts already! And plenty to grind them with.
Great, you best back a horse

Polly Grigora

Original Poster:

11,209 posts

117 months

Tuesday 22nd November 2022
quotequote all