3D Printed Door Caps and Other Rubber Bits

[The Three D Mucketeer]

pblake said:

These are my Mrk 1 Tuscan would like a driver and passenger set please if you can do them.

Edited by pblake on Sunday 30th June 07:43

Hi Peter,
Yes does look like the later MK1,MK2 , Convertible style. I'm stopping supplying for the next couple of weeks because I've got a stand at the TVR HEAVEN event on the the13th/14th July , and I'm trying to get some display items made.
I have your details and will post when I'm back in production

I'm trying to crack the early Tuscan MK1 issue, it turns out early MK1 didn't have A Post rubber muckets and leaked water like mad into the footwell. Cars were returned to the factory for rectification . One off solutions were deployed for a number of months and various iterations of the design until Trevor Cooper came up with the one you show. Hence my problem , I even think bodywork modifications were undertaken. So I'm unlikely to come up with a solution that fits all early Tuscan MK1 , without fitting by a specialist.

Edited by The Three D Mucketeer on Sunday 30th June 09:59

[porterpainter]

Hi there,

What stock will you be brining to TVR heaven with you? I have a MK1 Tuscan from 2003 which could do with all the bits refreshed.

Thanks
Andy

[The Three D Mucketeer]

porterpainter said:

Hi there,

What stock will you be brining to TVR heaven with you? I have a MK1 Tuscan from 2003 which could do with all the bits refreshed.

Thanks
Andy

Everything I have available ... but i'll want to keep an example of each till late on in the day as I will be taking orders on the day and it's better if people can see them in the flesh.

[porterpainter]

The Three D Mucketeer said:

Everything I have available ... but i'll want to keep an example of each till late on in the day as I will be taking orders on the day and it's better if people can see them in the flesh.

Thanks for the quick reply.

Makes sense…will keep my eye out for your stall on the day

[Uisa04]

Hi Keith, could I order a complete set of A and B’s for a T350c.

Thanks
Adrian

[The Three D Mucketeer]

Uisa04 said:

Hi Keith, could I order a complete set of A and B’s for a T350c.

Thanks
Adrian

Hi Adrian,
Drop me a Private Message with your address and I'll respond . I'll add you to the current order list, all my stock will go to the TVR HEAVEN EVENT this weekend, but you'll be in front of anyone who orders on Sunday .

[Rollitvr]

Hi guys
Can you tell me how the B-post rubbers are attached to the door

[mk1fan]

Hilti gun and nails.

[The Three D Mucketeer]

Rollitvr said:

Hi guys
Can you tell me how the B-post rubbers are attached to the door

Loctite Superglue (i prefer GEL) and Activator

[Mr.Chips]

I would be interested in a set of A and B posts for a T350C please.

[The Three D Mucketeer]

Mr.Chips said:

I would be interested in a set of A and B posts for a T350C please.

I have them available now drop me a PM with you address ... £80 "A" posts & £50 "B" Posts ... anyone ordering both I'll stand the P&P

[jstx]

Can you make them for the Cerbera?

[The Three D Mucketeer]

jstx said:

Can you make them for the Cerbera?

I could if I had a good example to scan, unfortunately I've not be able to get one . They are similar to a Chim,/Griff from what I've seen . So If you have one I can borrow I can make them , assuming the passenger and drivers are mirror images (which isn't necessarily the case with TVRs .

[The Three D Mucketeer]

PLEASE CAN ANY ONE E-MAILING ME VIA PH ... CHECK THEIR E_MAIL ADDRESSES ON HERE .....I'M GETTING LOADS OF REQUESTS FROM PEOPLE WHO DON'T RESPOND TO MY REPLIES !!!! UNLESS THEY CAN'T AFFORD MY PRICES

[The Three D Mucketeer]

Maybe I should extend my facility

[94Griff500]

Can I order a pair (LH & RH ) TVR Griffith door top finishers?
Can you ship to USA address? Pay by credit card?
Thxs
Doug Allen
1994 TVR Griffith 500 pre-serp
[e-mail]

[The Three D Mucketeer]

94Griff500 said:

Can I order a pair (LH & RH ) TVR Griffith door top finishers?
Can you ship to USA address? Pay by credit card?
Thxs
Doug Allen
1994 TVR Griffith 500 pre-serp
[e-mail]

No problem Doug ..I've dropped you a PM

[stephdav81]

Hi,

I saw you at TVR Heaven when you didn't have any Cerbera door Caps. I have the door caps off my Cerbera at the moment How would you like to use my Caps to create new ones. Obviously I would want a set for both doors ;o)

Regards
Steve

[Ortope]

Good morning.

Are the front and rear door end caps for a Sagaris still available?

Looking forward to hearing from you

Adriano

[The Three D Mucketeer]

Ortope said:

Good morning.

Are the front and rear door end caps for a Sagaris still available?

Looking forward to hearing from you

Adriano

Yes , I have one set ready.... I must make some more , but I've spent the last few weeks working on Cerbera ones , which will be available shortly..
You are not set up for e-mails, so I can't PM you .... email me [e-mail]